eHealth Infrastructure
5.0.1 - release Denmark flag

This page is part of the FUT Infrastructure (v5.0.1: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

ValueSet: Reference Range Type (Experimental)

Official URL: http://ehealth.sundhed.dk/vs/reference-range-type Version: 5.0.1
Active as of 2019-02-08 Computable Name: ReferenceRangeType

Reference Range type value set.

References

Logical Definition (CLD)

This value set includes codes based on the following rules:

 

Expansion

This value set contains 44 concepts

CodeSystemDisplayDefinition
  typehttp://terminology.hl7.org/CodeSystem/referencerange-meaningTypeGeneral types of reference range.
  normalhttp://terminology.hl7.org/CodeSystem/referencerange-meaningNormal RangeValues expected for a normal member of the relevant control population being measured. Typically each results producer such as a laboratory has specific normal ranges and they are usually defined as within two standard deviations from the mean and account for 95.45% of this population.
  recommendedhttp://terminology.hl7.org/CodeSystem/referencerange-meaningRecommended RangeThe range that is recommended by a relevant professional body.
  treatmenthttp://terminology.hl7.org/CodeSystem/referencerange-meaningTreatment RangeThe range at which treatment would/should be considered.
  therapeutichttp://terminology.hl7.org/CodeSystem/referencerange-meaningTherapeutic Desired LevelThe optimal range for best therapeutic outcomes.
  prehttp://terminology.hl7.org/CodeSystem/referencerange-meaningPre Therapeutic Desired LevelThe optimal range for best therapeutic outcomes for a specimen taken immediately before administration.
  posthttp://terminology.hl7.org/CodeSystem/referencerange-meaningPost Therapeutic Desired LevelThe optimal range for best therapeutic outcomes for a specimen taken immediately after administration.
  endocrinehttp://terminology.hl7.org/CodeSystem/referencerange-meaningEndocrineEndocrine related states that change the expected value.
  pre-pubertyhttp://terminology.hl7.org/CodeSystem/referencerange-meaningPre-PubertyAn expected range in an individual prior to puberty.
  follicularhttp://terminology.hl7.org/CodeSystem/referencerange-meaningFollicular StageAn expected range in an individual during the follicular stage of the cycle.
  midcyclehttp://terminology.hl7.org/CodeSystem/referencerange-meaningMidCycleAn expected range in an individual during the midcycle stage of the cycle.
  lutealhttp://terminology.hl7.org/CodeSystem/referencerange-meaningLutealAn expected range in an individual during the luteal stage of the cycle.
  postmenopausalhttp://terminology.hl7.org/CodeSystem/referencerange-meaningPost-MenopauseAn expected range in an individual post-menopause.
  DNK05472urn:oid:1.2.208.176.2.1Blodtryk systolisk;ArmArm—Blodtryk(systolisk); tryk = ? mmHg
  DNK05473urn:oid:1.2.208.176.2.1Blodtryk diastolisk;ArmArm—Blodtryk(diastolisk); tryk = ? mmHg
  NPU03011urn:oid:1.2.208.176.2.1Hb(Fe; O2-bind.; aB)—Oxygen(O2); mætn. = ?Hb(Fe; O2-bind.; aB)—Oxygen(O2); mætn. = ?
  NPU21692urn:oid:1.2.208.176.2.1Hjerte—Systole; frekv. = ? × 1/minHjerte—Systole; frekv. = ? × 1/min
  NPU03804urn:oid:1.2.208.176.2.1Pt—Legeme; masse = ? kgPt—Legeme; masse = ? kg
  NPU27281urn:oid:1.2.208.176.2.1Pt—Legeme; massekoefficient(masse/kvadreret højde) = ? kg/m²Pt—Legeme; massekoefficient(masse/kvadreret højde) = ? kg/m²
  NPU03794urn:oid:1.2.208.176.2.1Pt—Legeme; højde = ? mPt—Legeme; højde = ? m
  NPU08676urn:oid:1.2.208.176.2.1Pt—Legeme; temp. = ? °CPt—Legeme; temp. = ? °C
  MCS88015urn:oid:1.2.208.184.100.8FEV1;Lunge

Lunge—Lungefunktionsundersøgelse FEV1; vol. = ? L

  MCS88016urn:oid:1.2.208.184.100.8FVC;Lunge

Lunge—Lungefunktionsundersøgelse vitalkapasitet FVC; vol. = ? L

  MCS88017urn:oid:1.2.208.184.100.8FEV1/FVC;Lunge

Lunge—FEV1/FVC; ratio = ?

  MCS88021urn:oid:1.2.208.184.100.8MRC skala;Pt(KOL)

Pt(KOL) —MRC skala; arb.antal(værdi 1-5) = ?

  MCS88023urn:oid:1.2.208.184.100.8FEV1 af forventet værdi;Pt(KOL)

Pt(KOL)—FEV1 i % af den forventede værdi (efter højde,alder og køn); ratio = ?

  MCS88050urn:oid:1.2.208.184.100.8Rejse sætte sig testen;Pt

Pt—Rejse sætte sig testen; antal (værdi 0-50) = × 1/30s

  MCS88137urn:oid:1.2.208.184.100.8CAT score;Pt

Pt—COPD Assessment Test (CAT) score; antal(værdi 0-40) = ?

  MCS88192urn:oid:1.2.208.184.100.8Skridt per dag;Pt

Pt—Skridt; antal per dag (værdi) = ?

  MCS88193urn:oid:1.2.208.184.100.8Skridt per uge;Pt

Pt—Skridt; antal per uge (værdi) = ?

  MCS88194urn:oid:1.2.208.184.100.8Skridt;Pt

Pt—Skridt; antal (værdi) = ?

  ZZ3170urn:oid:1.2.208.176.2.4Hjemmeblodtryksmåling udført af patienten
  72287-6http://loinc.orgWound size panel
  39126-8http://loinc.orgLength of Wound
  39125-0http://loinc.orgWidth of Wound
  39127-6http://loinc.orgDepth of Wound
  89260-4http://loinc.orgArea of wound
  94083-3http://loinc.orgWound volume
  RALurn:oid:1.2.208.184.100.1Terapeutiske grænseværdier for RØD alarmTerapeutiske grænseværdier for RØD alarm
  GALurn:oid:1.2.208.184.100.1Terapeutiske grænseværdier for GUL alarmTerapeutiske grænseværdier for GUL alarm
  TBDhttp://ehealth.sundhed.dk/cs/reference-range-typeExample value - Under constructionExample value - Under construction
  TBD2http://ehealth.sundhed.dk/cs/reference-range-typeExample value2 - Under constructionExample value2 - Under construction
  RELRALhttp://ehealth.sundhed.dk/cs/reference-range-typeTerapeutic relative reference range for RED alarmTerapeutic relative reference range for RED alarm
  RELGALhttp://ehealth.sundhed.dk/cs/reference-range-typeTerapeutic relative reference range for YELLOW alarmTerapeutic relative reference range for YELLOW alarm

Explanation of the columns that may appear on this page:

Level A few code lists that FHIR defines are hierarchical - each code is assigned a level. In this scheme, some codes are under other codes, and imply that the code they are under also applies
System The source of the definition of the code (when the value set draws in codes defined elsewhere)
Code The code (used as the code in the resource instance)
Display The display (used in the display element of a Coding). If there is no display, implementers should not simply display the code, but map the concept into their application
Definition An explanation of the meaning of the concept
Comments Additional notes about how to use the code