eHealth Infrastructure
3.3.0 - release
eHealth Infrastructure
3.3.0 - release
This page is part of the FUT Infrastructure (v3.3.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions
| Active as of 2024-11-05 |
Definitions for the ehealth-resolved-timing extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Resolved timing reflects whether a measurement (Observation, QuestionnaireResponse or Media) has been performed ad-hoc or as fulfillment of a measurement regime time slot in which case the extent of the time slot is given by start and end. If the measurement regime has a form for which a time slot cannot be resolved or determining is/was not supported, the type unresolved is used. |
| Short | Resolved Timing |
| 2. Extension.extension | |
| Control | 2..? |
| 4. Extension.extension:serviceRequestVersionId | |
| Slice Name | serviceRequestVersionId |
| Control | 1..1 |
| 6. Extension.extension:serviceRequestVersionId.extension | |
| Control | 0..0 |
| 8. Extension.extension:serviceRequestVersionId.url | |
| Fixed Value | serviceRequestVersionId |
| 10. Extension.extension:serviceRequestVersionId.value[x] | |
| Control | 1..? |
| Type | id |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 12. Extension.extension:start | |
| Slice Name | start |
| Control | 0..1 |
| 14. Extension.extension:start.extension | |
| Control | 0..0 |
| 16. Extension.extension:start.url | |
| Fixed Value | start |
| 18. Extension.extension:start.value[x] | |
| Control | 1..? |
| Type | dateTime |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 20. Extension.extension:end | |
| Slice Name | end |
| Control | 0..1 |
| 22. Extension.extension:end.extension | |
| Control | 0..0 |
| 24. Extension.extension:end.url | |
| Fixed Value | end |
| 26. Extension.extension:end.value[x] | |
| Control | 1..? |
| Type | dateTime |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 28. Extension.extension:type | |
| Slice Name | type |
| Control | 1..1 |
| 30. Extension.extension:type.extension | |
| Control | 0..0 |
| 32. Extension.extension:type.url | |
| Fixed Value | type |
| 34. Extension.extension:type.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from Resolved Timing Type (required to http://ehealth.sundhed.dk/vs/resolved-timing-type) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 36. Extension.url | |
| Fixed Value | http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing |
| 38. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Resolved timing reflects whether a measurement (Observation, QuestionnaireResponse or Media) has been performed ad-hoc or as fulfillment of a measurement regime time slot in which case the extent of the time slot is given by start and end. If the measurement regime has a form for which a time slot cannot be resolved or determining is/was not supported, the type unresolved is used. Optional Extension Element - found in all resources. |
| Short | Resolved TimingOptional Extensions Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 20..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:serviceRequestVersionId | |
| Slice Name | serviceRequestVersionId |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:serviceRequestVersionId.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 8. Extension.extension:serviceRequestVersionId.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | serviceRequestVersionId |
| 10. Extension.extension:serviceRequestVersionId.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | id, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 12. Extension.extension:start | |
| Slice Name | start |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 14. Extension.extension:start.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 16. Extension.extension:start.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | start |
| 18. Extension.extension:start.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Extension.extension:end | |
| Slice Name | end |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 22. Extension.extension:end.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 24. Extension.extension:end.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | end |
| 26. Extension.extension:end.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:type | |
| Slice Name | type |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 30. Extension.extension:type.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:type.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | type |
| 34. Extension.extension:type.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see Resolved Timing Type (required to http://ehealth.sundhed.dk/vs/resolved-timing-type) |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing |
| 38. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Resolved timing reflects whether a measurement (Observation, QuestionnaireResponse or Media) has been performed ad-hoc or as fulfillment of a measurement regime time slot in which case the extent of the time slot is given by start and end. If the measurement regime has a form for which a time slot cannot be resolved or determining is/was not supported, the type unresolved is used. |
| Short | Resolved Timing |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 2..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:serviceRequestVersionId | |
| Slice Name | serviceRequestVersionId |
| Definition | An Extension |
| Short | Extension |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:serviceRequestVersionId.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:serviceRequestVersionId.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:serviceRequestVersionId.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | serviceRequestVersionId |
| 14. Extension.extension:serviceRequestVersionId.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | id |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:start | |
| Slice Name | start |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:start.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:start.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:start.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | start |
| 24. Extension.extension:start.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | dateTime |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:end | |
| Slice Name | end |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 28. Extension.extension:end.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 30. Extension.extension:end.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:end.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | end |
| 34. Extension.extension:end.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | dateTime |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:type | |
| Slice Name | type |
| Definition | An Extension |
| Short | Extension |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 38. Extension.extension:type.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 40. Extension.extension:type.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:type.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | type |
| 44. Extension.extension:type.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Resolved Timing Type (required to http://ehealth.sundhed.dk/vs/resolved-timing-type) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing |
| 48. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2021+ Den telemedicinske infrastruktur (eHealth Infrastructure). Package dk.ehealth.sundhed.fhir.ig.core#3.3.0 based on FHIR 4.0.1. Generated 2024-11-05
