This page is part of the FUT Infrastructure (v3.1.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions
Official URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task | Version: 3.1.0 | |||
Active as of 2024-07-01 | Computable Name: ehealth-task |
A task resource describes an activity that can be performed and tracks the state of completion of that activity. It is a representation that an activity should be or has been initiated, and eventually, represents the successful or unsuccessful completion of that activity.
In scope of the eHealth Infrastructure, the Task resource is used for:
ehealth-task-responsible
.owner
.Task resources are produced by the eHealth Infrastructure as reaction to measurements being submitted, measurements being submitted at odd timing or expected measurements not being submitted. Measurements in the form of Observation, QuestionnaireResponse or other resources are expected to be submitted by a Patient according to a measurement regime specified in a CarePlan and referenced CarePlan/ServiceRequest.
The context in which the Task is created is identified through episodeOfCare
. The focus
element describes what resource the Task responsible should be acting on and can reference any resource. The for
element can contain a reference to a Patient and shall be specified if the Task pertains to a Patient as subject. In case episodeOfCare
references an EpisodeOfCare, it is enforced that for
references the same Patient as is referenced in the EpisodeOfCare.”
The eHealth Infrastructure supports that automated processing rules can be defined as Library resources, attached to plans (through the complex of PlanDefinition/ActivityDefinition/Library and CarePlan/ServiceRequest) and applied to submitted measurements. This includes automated processing rules performing triaging based on comparison of submitted measurements against reference ranges specified in CarePlan/ServiceRequest.
The definition of each automated processing rule controls whether to create the following as a result of the applying the rule:
ehealth-message
ehealth-task
ehealth-clinicalimpression
A typical result of triaging, for instance, is expected to be:
In case no automated processing rule has been attached to the plan, the current fallback automated processing rule creates a Task that refers to a single measurement. This, however, could change.
A typical Task created by triaging is expected to have:
category
is a coding that states need to assess a triaging resultehealth-task-responsible
that references the one or more CareTeam attached to the CarePlanehealth-restriction-category
is a coding that can be used to restrict access to the task, for instance restricting a task so only CareTeam members involved in monitoring measurements can access itpriority
reflecting the urgency set by the triaging rulefocus
referencing the ClinicalImpression that was also created during triaging. Focus can be overridden by the automated processing rule to reference something different than the ClinicalImpression.In case the eHealth Infrastructure detects that a measurement submission is missing, it creates a Communication for the CareTeam(s) attached to the CarePlan stating that the Patient should be reminded to follow the measurement regime. It also creates a Task where:
category
is a coding that states need to resolve why measurement submission is missingehealth-task-responsible
references the one or more CareTeam attached to the CarePlanehealth-restriction-category
is a coding that can be used to restrict access to the task, for instance restricting a task so only CareTeam members involved in monitoring measurements can access itpriority
set to routine
focus
references the ServiceRequest for the missing measurementIn case the eHealth Infrastructure detects a measurement submission at unexpected or odd time compared to the measurement regime, it creates a Task where:
category
is a coding that states need to resolve unexpected measurement submission* Task ehealth-task-responsible
references the one or more CareTeam attached to the CarePlanehealth-restriction-category
is a coding that can be used to restrict access to the task, for instance restricting a task so only CareTeam members involved in monitoring measurements can access itpriority
set to routine
focus
references Observation, QuestionnaireResponse or Media (the measurement)No Task resources are created to assist in adhering to a measurement regime.
The Task extension ehealth-task-responsible
enables that multiple entities (CareTeam, Practitioner, Patient, RelatedPerson) can be responsible for the Task. It is expected, for instance, that each CareTeam will provide support/monitoring of multiple patients. The Task resources for which a CareTeam is responsible can form a list sorted by priority to support triaging.
When a Task has been assigned to a particular individual (through Task owner
) it is possible for the Task responsible(s) to reassign the Task. This way, CareTeam members can coordinate Task assignments (by adding Practitioner as Task owner and setting Task status) while preserving the CareTeam as fallback in case the Practitioner is unable to process the Task, for instance due to absence.
Usage:
Description of Profiles, Differentials, Snapshots and how the different presentations work.
This structure is derived from Task
Path | Conformance | ValueSet | URI |
Task.status | required | TaskStatushttp://hl7.org/fhir/ValueSet/task-status|4.0.1 from the FHIR Standard | |
Task.intent | required | TaskIntenthttp://hl7.org/fhir/ValueSet/task-intent|4.0.1 from the FHIR Standard | |
Task.priority | required | RequestPriorityhttp://hl7.org/fhir/ValueSet/request-priority|4.0.1 from the FHIR Standard |
Name | Flags | Card. | Type | Description & Constraints | ||||
---|---|---|---|---|---|---|---|---|
Task | C | 0..* | Task | A task to be performed inv-1: Last modified date must be greater than or equal to authored-on date. | ||||
id | Σ | 0..1 | id | Logical id of this artifact | ||||
meta | Σ | 0..1 | Meta | Metadata about the resource | ||||
implicitRules | ?!Σ | 0..1 | uri | A set of rules under which this content was created | ||||
language | 0..1 | code | Language of the resource content Binding: CommonLanguages (preferred): A human language.
| |||||
text | 0..1 | Narrative | Text summary of the resource, for human interpretation | |||||
contained | 0..* | Resource | Contained, inline Resources | |||||
Slices for extension | 4..* | Extension | Extension Slice: Unordered, Open by value:url | |||||
episodeOfCare | 1..1 | Reference(ehealth-episodeofcare) {r} | EpisodeOfCare URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-episodeOfCare | |||||
taskCategory | 1..1 | CodeableConcept | Category of task. URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-category Binding: Task Category (required) | |||||
taskResponsible | 1..* | Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | ehealth-careteam) | Responsible entity URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-responsible | |||||
restrictionCategory | 1..* | CodeableConcept | Restriction category URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-restriction-category Binding: Restriction Category (required) | |||||
resolvedTiming | 0..1 | (Complex) | Resolved Timing URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing | |||||
modifierExtension | ?! | 0..* | Extension | Extensions that cannot be ignored | ||||
identifier | 0..* | Identifier | Task Instance Identifier | |||||
instantiatesCanonical | Σ | 0..1 | canonical(ActivityDefinition) | Formal definition of task | ||||
instantiatesUri | Σ | 0..1 | uri | Formal definition of task | ||||
basedOn | Σ | 0..* | Reference(Resource) | Request fulfilled by this task | ||||
groupIdentifier | Σ | 0..1 | Identifier | Requisition or grouper id | ||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | |||||
use | ?!Σ | 0..1 | code | usual | official | temp | secondary | old (If known) Binding: IdentifierUse (required): Identifies the purpose for this identifier, if known . | ||||
type | Σ | 0..1 | CodeableConcept | Description of identifier Binding: Identifier Type Codes (extensible): A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. | ||||
system | Σ | 0..1 | uri | The namespace for the identifier value Example General: http://www.acme.com/identifiers/patient | ||||
value | Σ | 0..1 | string | The value that is unique Example General: 123456 | ||||
period | Σ | 0..1 | Period | Time period when id is/was valid for use | ||||
assigner | Σ | 0..1 | Reference(ehealth-organization) {r} | Organization that issued id (may be just text) | ||||
partOf | Σ | 0..* | Reference(ehealth-task) {r} | Composite task | ||||
status | ?!Σ | 1..1 | code | draft | requested | received | accepted | + Binding: TaskStatus (required): The current status of the task. | ||||
statusReason | Σ | 0..1 | CodeableConcept | Reason for current status Binding: (unbound) (example): Codes to identify the reason for current status. These will typically be specific to a particular workflow. | ||||
businessStatus | Σ | 0..1 | CodeableConcept | E.g. "Specimen collected", "IV prepped" Binding: (unbound) (example): The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc. | ||||
intent | SΣ | 1..1 | code | unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order. | ||||
priority | S | 1..1 | code | routine | urgent | asap | stat Binding: RequestPriority (required): The task's priority. | ||||
code | Σ | 0..1 | CodeableConcept | Task Type Binding: TaskCode (example): Codes to identify what the task involves. These will typically be specific to a particular workflow. | ||||
description | Σ | 0..1 | string | Human-readable explanation of task | ||||
focus | Σ | 0..1 | Reference(Resource) | What task is acting on | ||||
for | Σ | 0..1 | Reference(Resource) | Beneficiary of the Task | ||||
encounter | Σ | 0..1 | Reference(Encounter) | Healthcare event during which this task originated | ||||
executionPeriod | Σ | 0..1 | Period | Start and end time of execution | ||||
authoredOn | C | 0..1 | dateTime | Task Creation Date | ||||
lastModified | ΣC | 0..1 | dateTime | Task Last Modified Date | ||||
requester | Σ | 0..1 | Reference(ehealth-device | ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} | Who is asking for task to be done | ||||
performerType | 0..* | CodeableConcept | Requested performer Binding: ProcedurePerformerRoleCodes (preferred): The type(s) of task performers allowed. | |||||
owner | Σ | 0..1 | Reference(ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} | Responsible individual | ||||
location | Σ | 0..1 | Reference(Location) | Where task occurs | ||||
reasonCode | 0..1 | CodeableConcept | Why task is needed Binding: (unbound) (example): Indicates why the task is needed. E.g. Suspended because patient admitted to hospital. | |||||
reasonReference | 0..1 | Reference(Resource) | Why task is needed | |||||
insurance | 0..* | Reference(Coverage | ClaimResponse) | Associated insurance coverage | |||||
note | 0..* | Annotation | Comments made about the task | |||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | |||||
Slices for author[x] | Σ | 0..1 | Individual responsible for the annotation Slice: Unordered, Closed by type:$this | |||||
authorReference | Reference(Practitioner | Patient | RelatedPerson | Organization) | |||||||
authorString | string | |||||||
author[x]:authorReference | Σ | 0..1 | Reference(ehealth-practitioner | ehealth-patient | ehealth-relatedperson) | Individual responsible for the annotation | ||||
author[x]:authorString | Σ | 0..1 | string | Individual responsible for the annotation | ||||
time | Σ | 0..1 | dateTime | When the annotation was made | ||||
text | Σ | 1..1 | markdown | The annotation - text content (as markdown) | ||||
relevantHistory | 0..* | Reference(ehealth-provenance) {r} | Key events in history of the Task | |||||
restriction | 0..1 | BackboneElement | Constraints on fulfillment tasks | |||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations | |||||
modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
repetitions | 0..1 | positiveInt | How many times to repeat | |||||
period | 0..1 | Period | When fulfillment sought | |||||
recipient | 0..* | Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | Group | ehealth-organization) {r} | For whom is fulfillment sought? | |||||
input | 0..* | BackboneElement | Information used to perform task | |||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations | |||||
modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
type | 1..1 | CodeableConcept | Label for the input Binding: (unbound) (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. | |||||
value[x] | 1..1 | Content to use in performing the task | ||||||
valueBase64Binary | base64Binary | |||||||
valueBoolean | boolean | |||||||
valueCanonical | canonical(Any) | |||||||
valueCode | code | |||||||
valueDate | date | |||||||
valueDateTime | dateTime | |||||||
valueDecimal | decimal | |||||||
valueId | id | |||||||
valueInstant | instant | |||||||
valueInteger | integer | |||||||
valueMarkdown | markdown | |||||||
valueOid | oid | |||||||
valuePositiveInt | positiveInt | |||||||
valueString | string | |||||||
valueTime | time | |||||||
valueUnsignedInt | unsignedInt | |||||||
valueUri | uri | |||||||
valueUrl | url | |||||||
valueUuid | uuid | |||||||
valueAddress | Address | |||||||
valueAge | Age | |||||||
valueAnnotation | Annotation | |||||||
valueAttachment | Attachment | |||||||
valueCodeableConcept | CodeableConcept | |||||||
valueCoding | Coding | |||||||
valueContactPoint | ContactPoint | |||||||
valueCount | Count | |||||||
valueDistance | Distance | |||||||
valueDuration | Duration | |||||||
valueHumanName | HumanName | |||||||
valueIdentifier | Identifier | |||||||
valueMoney | Money | |||||||
valuePeriod | Period | |||||||
valueQuantity | Quantity | |||||||
valueRange | Range | |||||||
valueRatio | Ratio | |||||||
valueReference | Reference(Any) | |||||||
valueSampledData | SampledData | |||||||
valueSignature | Signature | |||||||
valueTiming | Timing | |||||||
valueContactDetail | ContactDetail | |||||||
valueContributor | Contributor | |||||||
valueDataRequirement | DataRequirement | |||||||
valueExpression | Expression | |||||||
valueParameterDefinition | ParameterDefinition | |||||||
valueRelatedArtifact | RelatedArtifact | |||||||
valueTriggerDefinition | TriggerDefinition | |||||||
valueUsageContext | UsageContext | |||||||
valueDosage | Dosage | |||||||
valueMeta | Meta | |||||||
output | 0..* | BackboneElement | Information produced as part of task | |||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations | |||||
modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
type | 1..1 | CodeableConcept | Label for output Binding: (unbound) (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. | |||||
value[x] | 1..1 | Result of output | ||||||
valueBase64Binary | base64Binary | |||||||
valueBoolean | boolean | |||||||
valueCanonical | canonical(Any) | |||||||
valueCode | code | |||||||
valueDate | date | |||||||
valueDateTime | dateTime | |||||||
valueDecimal | decimal | |||||||
valueId | id | |||||||
valueInstant | instant | |||||||
valueInteger | integer | |||||||
valueMarkdown | markdown | |||||||
valueOid | oid | |||||||
valuePositiveInt | positiveInt | |||||||
valueString | string | |||||||
valueTime | time | |||||||
valueUnsignedInt | unsignedInt | |||||||
valueUri | uri | |||||||
valueUrl | url | |||||||
valueUuid | uuid | |||||||
valueAddress | Address | |||||||
valueAge | Age | |||||||
valueAnnotation | Annotation | |||||||
valueAttachment | Attachment | |||||||
valueCodeableConcept | CodeableConcept | |||||||
valueCoding | Coding | |||||||
valueContactPoint | ContactPoint | |||||||
valueCount | Count | |||||||
valueDistance | Distance | |||||||
valueDuration | Duration | |||||||
valueHumanName | HumanName | |||||||
valueIdentifier | Identifier | |||||||
valueMoney | Money | |||||||
valuePeriod | Period | |||||||
valueQuantity | Quantity | |||||||
valueRange | Range | |||||||
valueRatio | Ratio | |||||||
valueReference | Reference(Any) | |||||||
valueSampledData | SampledData | |||||||
valueSignature | Signature | |||||||
valueTiming | Timing | |||||||
valueContactDetail | ContactDetail | |||||||
valueContributor | Contributor | |||||||
valueDataRequirement | DataRequirement | |||||||
valueExpression | Expression | |||||||
valueParameterDefinition | ParameterDefinition | |||||||
valueRelatedArtifact | RelatedArtifact | |||||||
valueTriggerDefinition | TriggerDefinition | |||||||
valueUsageContext | UsageContext | |||||||
valueDosage | Dosage | |||||||
valueMeta | Meta | |||||||
Documentation for this format |
Path | Conformance | ValueSet | URI | |||
Task.language | preferred | CommonLanguages
http://hl7.org/fhir/ValueSet/languages from the FHIR Standard | ||||
Task.groupIdentifier.use | required | IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1 from the FHIR Standard | ||||
Task.groupIdentifier.type | extensible | Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type from the FHIR Standard | ||||
Task.status | required | TaskStatushttp://hl7.org/fhir/ValueSet/task-status|4.0.1 from the FHIR Standard | ||||
Task.statusReason | example | |||||
Task.businessStatus | example | |||||
Task.intent | required | TaskIntenthttp://hl7.org/fhir/ValueSet/task-intent|4.0.1 from the FHIR Standard | ||||
Task.priority | required | RequestPriorityhttp://hl7.org/fhir/ValueSet/request-priority|4.0.1 from the FHIR Standard | ||||
Task.code | example | TaskCodehttp://hl7.org/fhir/ValueSet/task-code from the FHIR Standard | ||||
Task.performerType | preferred | ProcedurePerformerRoleCodeshttp://hl7.org/fhir/ValueSet/performer-role from the FHIR Standard | ||||
Task.reasonCode | example | |||||
Task.input.type | example | |||||
Task.output.type | example |
This structure is derived from Task
Summary
Mandatory: 5 elements
Must-Support: 2 elements
Structures
This structure refers to these other structures:
Extensions
This structure refers to these extensions:
Slices
This structure defines the following Slices:
Differential View
This structure is derived from Task
Key Elements View
Path | Conformance | ValueSet | URI |
Task.status | required | TaskStatushttp://hl7.org/fhir/ValueSet/task-status|4.0.1 from the FHIR Standard | |
Task.intent | required | TaskIntenthttp://hl7.org/fhir/ValueSet/task-intent|4.0.1 from the FHIR Standard | |
Task.priority | required | RequestPriorityhttp://hl7.org/fhir/ValueSet/request-priority|4.0.1 from the FHIR Standard |
Snapshot View
Name | Flags | Card. | Type | Description & Constraints | ||||
---|---|---|---|---|---|---|---|---|
Task | C | 0..* | Task | A task to be performed inv-1: Last modified date must be greater than or equal to authored-on date. | ||||
id | Σ | 0..1 | id | Logical id of this artifact | ||||
meta | Σ | 0..1 | Meta | Metadata about the resource | ||||
implicitRules | ?!Σ | 0..1 | uri | A set of rules under which this content was created | ||||
language | 0..1 | code | Language of the resource content Binding: CommonLanguages (preferred): A human language.
| |||||
text | 0..1 | Narrative | Text summary of the resource, for human interpretation | |||||
contained | 0..* | Resource | Contained, inline Resources | |||||
Slices for extension | 4..* | Extension | Extension Slice: Unordered, Open by value:url | |||||
episodeOfCare | 1..1 | Reference(ehealth-episodeofcare) {r} | EpisodeOfCare URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-episodeOfCare | |||||
taskCategory | 1..1 | CodeableConcept | Category of task. URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-category Binding: Task Category (required) | |||||
taskResponsible | 1..* | Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | ehealth-careteam) | Responsible entity URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-responsible | |||||
restrictionCategory | 1..* | CodeableConcept | Restriction category URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-restriction-category Binding: Restriction Category (required) | |||||
resolvedTiming | 0..1 | (Complex) | Resolved Timing URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing | |||||
modifierExtension | ?! | 0..* | Extension | Extensions that cannot be ignored | ||||
identifier | 0..* | Identifier | Task Instance Identifier | |||||
instantiatesCanonical | Σ | 0..1 | canonical(ActivityDefinition) | Formal definition of task | ||||
instantiatesUri | Σ | 0..1 | uri | Formal definition of task | ||||
basedOn | Σ | 0..* | Reference(Resource) | Request fulfilled by this task | ||||
groupIdentifier | Σ | 0..1 | Identifier | Requisition or grouper id | ||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | |||||
use | ?!Σ | 0..1 | code | usual | official | temp | secondary | old (If known) Binding: IdentifierUse (required): Identifies the purpose for this identifier, if known . | ||||
type | Σ | 0..1 | CodeableConcept | Description of identifier Binding: Identifier Type Codes (extensible): A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. | ||||
system | Σ | 0..1 | uri | The namespace for the identifier value Example General: http://www.acme.com/identifiers/patient | ||||
value | Σ | 0..1 | string | The value that is unique Example General: 123456 | ||||
period | Σ | 0..1 | Period | Time period when id is/was valid for use | ||||
assigner | Σ | 0..1 | Reference(ehealth-organization) {r} | Organization that issued id (may be just text) | ||||
partOf | Σ | 0..* | Reference(ehealth-task) {r} | Composite task | ||||
status | ?!Σ | 1..1 | code | draft | requested | received | accepted | + Binding: TaskStatus (required): The current status of the task. | ||||
statusReason | Σ | 0..1 | CodeableConcept | Reason for current status Binding: (unbound) (example): Codes to identify the reason for current status. These will typically be specific to a particular workflow. | ||||
businessStatus | Σ | 0..1 | CodeableConcept | E.g. "Specimen collected", "IV prepped" Binding: (unbound) (example): The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc. | ||||
intent | SΣ | 1..1 | code | unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order. | ||||
priority | S | 1..1 | code | routine | urgent | asap | stat Binding: RequestPriority (required): The task's priority. | ||||
code | Σ | 0..1 | CodeableConcept | Task Type Binding: TaskCode (example): Codes to identify what the task involves. These will typically be specific to a particular workflow. | ||||
description | Σ | 0..1 | string | Human-readable explanation of task | ||||
focus | Σ | 0..1 | Reference(Resource) | What task is acting on | ||||
for | Σ | 0..1 | Reference(Resource) | Beneficiary of the Task | ||||
encounter | Σ | 0..1 | Reference(Encounter) | Healthcare event during which this task originated | ||||
executionPeriod | Σ | 0..1 | Period | Start and end time of execution | ||||
authoredOn | C | 0..1 | dateTime | Task Creation Date | ||||
lastModified | ΣC | 0..1 | dateTime | Task Last Modified Date | ||||
requester | Σ | 0..1 | Reference(ehealth-device | ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} | Who is asking for task to be done | ||||
performerType | 0..* | CodeableConcept | Requested performer Binding: ProcedurePerformerRoleCodes (preferred): The type(s) of task performers allowed. | |||||
owner | Σ | 0..1 | Reference(ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} | Responsible individual | ||||
location | Σ | 0..1 | Reference(Location) | Where task occurs | ||||
reasonCode | 0..1 | CodeableConcept | Why task is needed Binding: (unbound) (example): Indicates why the task is needed. E.g. Suspended because patient admitted to hospital. | |||||
reasonReference | 0..1 | Reference(Resource) | Why task is needed | |||||
insurance | 0..* | Reference(Coverage | ClaimResponse) | Associated insurance coverage | |||||
note | 0..* | Annotation | Comments made about the task | |||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | |||||
Slices for author[x] | Σ | 0..1 | Individual responsible for the annotation Slice: Unordered, Closed by type:$this | |||||
authorReference | Reference(Practitioner | Patient | RelatedPerson | Organization) | |||||||
authorString | string | |||||||
author[x]:authorReference | Σ | 0..1 | Reference(ehealth-practitioner | ehealth-patient | ehealth-relatedperson) | Individual responsible for the annotation | ||||
author[x]:authorString | Σ | 0..1 | string | Individual responsible for the annotation | ||||
time | Σ | 0..1 | dateTime | When the annotation was made | ||||
text | Σ | 1..1 | markdown | The annotation - text content (as markdown) | ||||
relevantHistory | 0..* | Reference(ehealth-provenance) {r} | Key events in history of the Task | |||||
restriction | 0..1 | BackboneElement | Constraints on fulfillment tasks | |||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations | |||||
modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
repetitions | 0..1 | positiveInt | How many times to repeat | |||||
period | 0..1 | Period | When fulfillment sought | |||||
recipient | 0..* | Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | Group | ehealth-organization) {r} | For whom is fulfillment sought? | |||||
input | 0..* | BackboneElement | Information used to perform task | |||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations | |||||
modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
type | 1..1 | CodeableConcept | Label for the input Binding: (unbound) (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. | |||||
value[x] | 1..1 | Content to use in performing the task | ||||||
valueBase64Binary | base64Binary | |||||||
valueBoolean | boolean | |||||||
valueCanonical | canonical(Any) | |||||||
valueCode | code | |||||||
valueDate | date | |||||||
valueDateTime | dateTime | |||||||
valueDecimal | decimal | |||||||
valueId | id | |||||||
valueInstant | instant | |||||||
valueInteger | integer | |||||||
valueMarkdown | markdown | |||||||
valueOid | oid | |||||||
valuePositiveInt | positiveInt | |||||||
valueString | string | |||||||
valueTime | time | |||||||
valueUnsignedInt | unsignedInt | |||||||
valueUri | uri | |||||||
valueUrl | url | |||||||
valueUuid | uuid | |||||||
valueAddress | Address | |||||||
valueAge | Age | |||||||
valueAnnotation | Annotation | |||||||
valueAttachment | Attachment | |||||||
valueCodeableConcept | CodeableConcept | |||||||
valueCoding | Coding | |||||||
valueContactPoint | ContactPoint | |||||||
valueCount | Count | |||||||
valueDistance | Distance | |||||||
valueDuration | Duration | |||||||
valueHumanName | HumanName | |||||||
valueIdentifier | Identifier | |||||||
valueMoney | Money | |||||||
valuePeriod | Period | |||||||
valueQuantity | Quantity | |||||||
valueRange | Range | |||||||
valueRatio | Ratio | |||||||
valueReference | Reference(Any) | |||||||
valueSampledData | SampledData | |||||||
valueSignature | Signature | |||||||
valueTiming | Timing | |||||||
valueContactDetail | ContactDetail | |||||||
valueContributor | Contributor | |||||||
valueDataRequirement | DataRequirement | |||||||
valueExpression | Expression | |||||||
valueParameterDefinition | ParameterDefinition | |||||||
valueRelatedArtifact | RelatedArtifact | |||||||
valueTriggerDefinition | TriggerDefinition | |||||||
valueUsageContext | UsageContext | |||||||
valueDosage | Dosage | |||||||
valueMeta | Meta | |||||||
output | 0..* | BackboneElement | Information produced as part of task | |||||
id | 0..1 | string | Unique id for inter-element referencing | |||||
extension | 0..* | Extension | Additional content defined by implementations | |||||
modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
type | 1..1 | CodeableConcept | Label for output Binding: (unbound) (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. | |||||
value[x] | 1..1 | Result of output | ||||||
valueBase64Binary | base64Binary | |||||||
valueBoolean | boolean | |||||||
valueCanonical | canonical(Any) | |||||||
valueCode | code | |||||||
valueDate | date | |||||||
valueDateTime | dateTime | |||||||
valueDecimal | decimal | |||||||
valueId | id | |||||||
valueInstant | instant | |||||||
valueInteger | integer | |||||||
valueMarkdown | markdown | |||||||
valueOid | oid | |||||||
valuePositiveInt | positiveInt | |||||||
valueString | string | |||||||
valueTime | time | |||||||
valueUnsignedInt | unsignedInt | |||||||
valueUri | uri | |||||||
valueUrl | url | |||||||
valueUuid | uuid | |||||||
valueAddress | Address | |||||||
valueAge | Age | |||||||
valueAnnotation | Annotation | |||||||
valueAttachment | Attachment | |||||||
valueCodeableConcept | CodeableConcept | |||||||
valueCoding | Coding | |||||||
valueContactPoint | ContactPoint | |||||||
valueCount | Count | |||||||
valueDistance | Distance | |||||||
valueDuration | Duration | |||||||
valueHumanName | HumanName | |||||||
valueIdentifier | Identifier | |||||||
valueMoney | Money | |||||||
valuePeriod | Period | |||||||
valueQuantity | Quantity | |||||||
valueRange | Range | |||||||
valueRatio | Ratio | |||||||
valueReference | Reference(Any) | |||||||
valueSampledData | SampledData | |||||||
valueSignature | Signature | |||||||
valueTiming | Timing | |||||||
valueContactDetail | ContactDetail | |||||||
valueContributor | Contributor | |||||||
valueDataRequirement | DataRequirement | |||||||
valueExpression | Expression | |||||||
valueParameterDefinition | ParameterDefinition | |||||||
valueRelatedArtifact | RelatedArtifact | |||||||
valueTriggerDefinition | TriggerDefinition | |||||||
valueUsageContext | UsageContext | |||||||
valueDosage | Dosage | |||||||
valueMeta | Meta | |||||||
Documentation for this format |
Path | Conformance | ValueSet | URI | |||
Task.language | preferred | CommonLanguages
http://hl7.org/fhir/ValueSet/languages from the FHIR Standard | ||||
Task.groupIdentifier.use | required | IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1 from the FHIR Standard | ||||
Task.groupIdentifier.type | extensible | Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type from the FHIR Standard | ||||
Task.status | required | TaskStatushttp://hl7.org/fhir/ValueSet/task-status|4.0.1 from the FHIR Standard | ||||
Task.statusReason | example | |||||
Task.businessStatus | example | |||||
Task.intent | required | TaskIntenthttp://hl7.org/fhir/ValueSet/task-intent|4.0.1 from the FHIR Standard | ||||
Task.priority | required | RequestPriorityhttp://hl7.org/fhir/ValueSet/request-priority|4.0.1 from the FHIR Standard | ||||
Task.code | example | TaskCodehttp://hl7.org/fhir/ValueSet/task-code from the FHIR Standard | ||||
Task.performerType | preferred | ProcedurePerformerRoleCodeshttp://hl7.org/fhir/ValueSet/performer-role from the FHIR Standard | ||||
Task.reasonCode | example | |||||
Task.input.type | example | |||||
Task.output.type | example |
This structure is derived from Task
Summary
Mandatory: 5 elements
Must-Support: 2 elements
Structures
This structure refers to these other structures:
Extensions
This structure refers to these extensions:
Slices
This structure defines the following Slices:
Other representations of profile: CSV, Excel, Schematron