eHealth Infrastructure
3.3.0 - release Denmark flag

This page is part of the FUT Infrastructure (v3.3.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: ehealth-communication-request - Detailed Descriptions

Active as of 2024-11-05

Definitions for the ehealth-communication-request resource profile.

Guidance on how to interpret the contents of this table can be found here

0. CommunicationRequest
2. CommunicationRequest.extension
SlicingThis element introduces a set of slices on CommunicationRequest.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. CommunicationRequest.extension:episodeOfCare
    Slice NameepisodeOfCare
    Control0..1
    TypeExtension(Episode of care) (Extension Type: Reference(EpisodeOfCare))
    6. CommunicationRequest.basedOn
    Control0..1
    8. CommunicationRequest.category
    BindingThe codes SHALL be taken from MessageCategory
    (required to http://ehealth.sundhed.dk/vs/message-category)
    10. CommunicationRequest.priority
    BindingThe codes SHALL be taken from RequestPriority
    (required to http://hl7.org/fhir/ValueSet/request-priority)
    12. CommunicationRequest.medium
    BindingThe codes SHALL be taken from MessageMedium
    (required to http://ehealth.sundhed.dk/vs/message-medium)
    14. CommunicationRequest.subject
    Control1..?
    TypeReference(Patient)
    16. CommunicationRequest.recipient
    TypeReference(Patient, CareTeam)referenced

    Guidance on how to interpret the contents of this table can be found here

    0. CommunicationRequest
    Definition

    A request to convey information; e.g. the CDS system proposes that an alert be sent to a responsible provider, the CDS system proposes that the public health agency be notified about a reportable condition.

    ShortA request for information to be sent to a receiver
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. CommunicationRequest.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. CommunicationRequest.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on CommunicationRequest.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 6. CommunicationRequest.extension:episodeOfCare
      Slice NameepisodeOfCare
      Definition

      Identifies the episode(s) of care that this resource is relevant to. Establishes the EpisodeOfCare as a 'grouper' of resources that are relevant to that episode.

      ShortAssociated Encounter episode of care
      Control0..1
      TypeExtension(Episode of care) (Extension Type: Reference(EpisodeOfCare))
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      8. CommunicationRequest.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      10. CommunicationRequest.basedOn
      Definition

      A plan or proposal that is fulfilled in whole or in part by this request.

      ShortFulfills plan or proposal
      Control0..1*
      TypeReference(Resource)
      Is Modifierfalse
      Summarytrue
      Requirements

      Allows tracing of authorization for the request and tracking whether proposals/recommendations were acted upon.

      Alternate Namesfulfills
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. CommunicationRequest.status
      Definition

      The status of the proposal or order.

      Shortdraft | active | on-hold | revoked | completed | entered-in-error | unknown
      Control1..1
      BindingThe codes SHALL be taken from RequestStatushttp://hl7.org/fhir/ValueSet/request-status|4.0.1
      (required to http://hl7.org/fhir/ValueSet/request-status|4.0.1)

      The status of the communication request.

      Typecode
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. CommunicationRequest.category
      Definition

      The type of message to be sent such as alert, notification, reminder, instruction, etc.

      ShortMessage category
      Comments

      There may be multiple axes of categorization and one communication request may serve multiple purposes.

      Control0..*
      BindingThe codes SHALL be taken from For example codes, see MessageCategoryhttp://hl7.org/fhir/ValueSet/communication-category
      (required to http://ehealth.sundhed.dk/vs/message-category)
      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. CommunicationRequest.priority
      Definition

      Characterizes how quickly the proposed act must be initiated. Includes concepts such as stat, urgent, routine.

      Shortroutine | urgent | asap | stat
      Control0..1
      BindingThe codes SHALL be taken from RequestPriorityhttp://hl7.org/fhir/ValueSet/request-priority|4.0.1
      (required to http://hl7.org/fhir/ValueSet/request-priority)
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Meaning if MissingIf missing, this task should be performed with normal priority
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. CommunicationRequest.doNotPerform
      Definition

      If true indicates that the CommunicationRequest is asking for the specified action to not occur.

      ShortTrue if request is prohibiting action
      Comments

      The attributes provided with the request qualify what is not to be done.

      Control0..1
      Typeboolean
      Is Modifiertrue because If true this element negates the specified action. For Example, instead of a request for a communication, it is a request for the communication to not occur.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Alternate Namesprohibited
      Meaning if MissingIf do not perform is not specified, the request is a positive request e.g. "do perform"
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. CommunicationRequest.medium
      Definition

      A channel that was used for this communication (e.g. email, fax).

      ShortA channel of communication
      Control0..*
      BindingThe codes SHALL be taken from For example codes, see MessageMediumhttp://terminology.hl7.org/ValueSet/v3-ParticipationMode
      (required to http://ehealth.sundhed.dk/vs/message-medium)
      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. CommunicationRequest.subject
      Definition

      The patient or group that is the focus of this communication request.

      ShortFocus of message
      Control10..1
      TypeReference(Patient, Group)
      Is Modifierfalse
      Summaryfalse
      Alternate Namespatient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. CommunicationRequest.recipient
      Definition

      The entity (e.g. person, organization, clinical information system, device, group, or care team) which is the intended target of the communication.

      ShortMessage recipient
      Control0..*
      TypeReference(Patient, CareTeam, Device, Organization, Practitioner, PractitionerRole, RelatedPerson, Group, HealthcareService)referenced
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. CommunicationRequest
      Definition

      A request to convey information; e.g. the CDS system proposes that an alert be sent to a responsible provider, the CDS system proposes that the public health agency be notified about a reportable condition.

      ShortA request for information to be sent to a receiver
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. CommunicationRequest.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. CommunicationRequest.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. CommunicationRequest.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. CommunicationRequest.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. CommunicationRequest.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. CommunicationRequest.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. CommunicationRequest.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on CommunicationRequest.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. CommunicationRequest.extension:episodeOfCare
        Slice NameepisodeOfCare
        Definition

        Identifies the episode(s) of care that this resource is relevant to. Establishes the EpisodeOfCare as a 'grouper' of resources that are relevant to that episode.

        ShortAssociated Encounter episode of care
        Control0..1
        TypeExtension(Episode of care) (Extension Type: Reference(EpisodeOfCare))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. CommunicationRequest.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. CommunicationRequest.identifier
        Definition

        Business identifiers assigned to this communication request by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

        ShortUnique identifier
        Comments

        This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows identification of the communication request as it is known by various participating systems and in a way that remains consistent across servers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. CommunicationRequest.basedOn
        Definition

        A plan or proposal that is fulfilled in whole or in part by this request.

        ShortFulfills plan or proposal
        Control0..1
        TypeReference(Resource)
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows tracing of authorization for the request and tracking whether proposals/recommendations were acted upon.

        Alternate Namesfulfills
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. CommunicationRequest.replaces
        Definition

        Completed or terminated request(s) whose function is taken by this new request.

        ShortRequest(s) replaced by this request
        Comments

        The replacement could be because the initial request was immediately rejected (due to an issue) or because the previous request was completed, but the need for the action described by the request remains ongoing.

        Control0..*
        TypeReference(CommunicationRequest)
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows tracing the continuation of a therapy or administrative process instantiated through multiple requests.

        Alternate Namessupersedes, prior
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. CommunicationRequest.groupIdentifier
        Definition

        A shared identifier common to all requests that were authorized more or less simultaneously by a single author, representing the identifier of the requisition, prescription or similar form.

        ShortComposite request this is part of
        Comments

        Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

        Control0..1
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Alternate NamesgrouperId
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. CommunicationRequest.status
        Definition

        The status of the proposal or order.

        Shortdraft | active | on-hold | revoked | completed | entered-in-error | unknown
        Control1..1
        BindingThe codes SHALL be taken from RequestStatus
        (required to http://hl7.org/fhir/ValueSet/request-status|4.0.1)

        The status of the communication request.

        Typecode
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. CommunicationRequest.statusReason
        Definition

        Captures the reason for the current state of the CommunicationRequest.

        ShortReason for current status
        Comments

        This is generally only used for "exception" statuses such as "suspended" or "cancelled". The reason why the CommunicationRequest was created at all is captured in reasonCode, not here. [distinct reason codes for different statuses can be enforced using invariants if they are universal bindings].

        Control0..1
        Binding

        Codes identifying the reason for the current state of a request.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Alternate NamesSuspended Reason, Cancelled Reason
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. CommunicationRequest.category
        Definition

        The type of message to be sent such as alert, notification, reminder, instruction, etc.

        ShortMessage category
        Comments

        There may be multiple axes of categorization and one communication request may serve multiple purposes.

        Control0..*
        BindingThe codes SHALL be taken from MessageCategory
        (required to http://ehealth.sundhed.dk/vs/message-category)
        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. CommunicationRequest.priority
        Definition

        Characterizes how quickly the proposed act must be initiated. Includes concepts such as stat, urgent, routine.

        Shortroutine | urgent | asap | stat
        Control0..1
        BindingThe codes SHALL be taken from RequestPriority
        (required to http://hl7.org/fhir/ValueSet/request-priority)
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Meaning if MissingIf missing, this task should be performed with normal priority
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. CommunicationRequest.doNotPerform
        Definition

        If true indicates that the CommunicationRequest is asking for the specified action to not occur.

        ShortTrue if request is prohibiting action
        Comments

        The attributes provided with the request qualify what is not to be done.

        Control0..1
        Typeboolean
        Is Modifiertrue because If true this element negates the specified action. For Example, instead of a request for a communication, it is a request for the communication to not occur.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Alternate Namesprohibited
        Meaning if MissingIf do not perform is not specified, the request is a positive request e.g. "do perform"
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. CommunicationRequest.medium
        Definition

        A channel that was used for this communication (e.g. email, fax).

        ShortA channel of communication
        Control0..*
        BindingThe codes SHALL be taken from MessageMedium
        (required to http://ehealth.sundhed.dk/vs/message-medium)
        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. CommunicationRequest.subject
        Definition

        The patient or group that is the focus of this communication request.

        ShortFocus of message
        Control1..1
        TypeReference(Patient)
        Is Modifierfalse
        Summaryfalse
        Alternate Namespatient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. CommunicationRequest.about
        Definition

        Other resources that pertain to this communication request and to which this communication request should be associated.

        ShortResources that pertain to this communication request
        Comments

        Don't use CommunicationRequest.about element when a more specific element exists, such as basedOn, reasonReference, or replaces.

        Control0..*
        TypeReference(Resource)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. CommunicationRequest.encounter
        Definition

        The Encounter during which this CommunicationRequest was created or to which the creation of this record is tightly associated.

        ShortEncounter created as part of
        Comments

        This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

        Control0..1
        TypeReference(Encounter)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. CommunicationRequest.payload
        Definition

        Text, attachment(s), or resource(s) to be communicated to the recipient.

        ShortMessage payload
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. CommunicationRequest.payload.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        50. CommunicationRequest.payload.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        52. CommunicationRequest.payload.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        54. CommunicationRequest.payload.content[x]
        Definition

        The communicated content (or for multi-part communications, one portion of the communication).

        ShortMessage part content
        Control1..1
        TypeChoice of: string, Attachment, Reference(Resource)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. CommunicationRequest.occurrence[x]
        Definition

        The time when this communication is to occur.

        ShortWhen scheduled
        Control0..1
        TypeChoice of: dateTime, Period
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Alternate Namestiming
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. CommunicationRequest.authoredOn
        Definition

        For draft requests, indicates the date of initial creation. For requests with other statuses, indicates the date of activation.

        ShortWhen request transitioned to being actionable
        Control0..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Alternate NamescreatedOn
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        60. CommunicationRequest.requester
        Definition

        The device, individual, or organization who initiated the request and has responsibility for its activation.

        ShortWho/what is requesting service
        Control0..1
        TypeReference(Practitioner, PractitionerRole, Organization, Patient, RelatedPerson, Device)
        Is Modifierfalse
        Summarytrue
        Alternate Namesauthor
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. CommunicationRequest.recipient
        Definition

        The entity (e.g. person, organization, clinical information system, device, group, or care team) which is the intended target of the communication.

        ShortMessage recipient
        Control0..*
        TypeReference(Patient, CareTeam)referenced
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        64. CommunicationRequest.sender
        Definition

        The entity (e.g. person, organization, clinical information system, or device) which is to be the source of the communication.

        ShortMessage sender
        Control0..1
        TypeReference(Device, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson, HealthcareService)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        66. CommunicationRequest.reasonCode
        Definition

        Describes why the request is being made in coded or textual form.

        ShortWhy is communication needed?
        Comments

        Textual reasons can be captured using reasonCode.text.

        Control0..*
        BindingFor example codes, see v3 Code System ActReason
        (example to http://terminology.hl7.org/ValueSet/v3-ActReason)

        Codes for describing reasons for the occurrence of a communication.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        68. CommunicationRequest.reasonReference
        Definition

        Indicates another resource whose existence justifies this request.

        ShortWhy is communication needed?
        Control0..*
        TypeReference(Condition, Observation, DiagnosticReport, DocumentReference)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        70. CommunicationRequest.note
        Definition

        Comments made about the request by the requester, sender, recipient, subject or other participants.

        ShortComments made about communication request
        Control0..*
        TypeAnnotation
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))