eHealth Infrastructure
3.2.0 - release

This page is part of the FUT Infrastructure (v3.2.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: ehealth-plandefinition - Detailed Descriptions

Active as of 2024-09-02

Definitions for the ehealth-plandefinition resource profile.

Guidance on how to interpret the contents of this table can be found here

0. PlanDefinition
2. PlanDefinition.extension
Control1..?
SlicingThis element introduces a set of slices on PlanDefinition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. PlanDefinition.extension:recommendation
    Slice Namerecommendation
    Control0..1
    TypeExtension(recommendation) (Extension Type: CodeableConcept)
    6. PlanDefinition.extension:intendedAudience
    Slice NameintendedAudience
    Control0..*
    TypeExtension(Intended audience) (Extension Type: Reference(ehealth-organization)referenced)
    8. PlanDefinition.extension:modifierRole
    Slice NamemodifierRole
    Control1..*
    TypeExtension(Modified role) (Complex Extension)
    10. PlanDefinition.extension:employeeTitle
    Slice NameemployeeTitle
    Control0..1
    TypeExtension(Employee title) (Extension Type: string)
    12. PlanDefinition.extension:predecessor
    Slice Namepredecessor
    Control0..1
    TypeExtension(Predecessor) (Extension Type: Identifier)
    14. PlanDefinition.extension:base
    Slice Namebase
    Control0..1
    TypeExtension(Base) (Extension Type: Identifier)
    16. PlanDefinition.extension:baseEnvironment
    Slice NamebaseEnvironment
    Control0..1
    TypeExtension(Base environment) (Extension Type: Identifier)
    18. PlanDefinition.version
    NoteThis is a business version Id, not a resource version Id (see discussion)
    Control1..?
    20. PlanDefinition.jurisdiction
    BindingThe codes SHALL be taken from Jurisdiction
    (required to http://ehealth.sundhed.dk/vs/jurisdiction)
    22. PlanDefinition.topic
    BindingThe codes SHALL be taken from Topic Type
    (required to http://ehealth.sundhed.dk/vs/topic-type)
    24. PlanDefinition.library
    Typecanonical(ehealth-library)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    26. PlanDefinition.action
    28. PlanDefinition.action.extension
    SlicingThis element introduces a set of slices on PlanDefinition.action.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 30. PlanDefinition.action.extension:overviewUsageMode
      Slice NameoverviewUsageMode
      Control0..*
      TypeExtension(Overview usage mode) (Extension Type: CodeableConcept)
      32. PlanDefinition.action.extension:ehealth-actionTrigger
      Slice Nameehealth-actionTrigger
      Control0..1
      TypeExtension(Action Trigger) (Complex Extension)
      34. PlanDefinition.action.extension:includeAsExtra
      Slice NameincludeAsExtra
      Control0..1
      TypeExtension(includeAsExtra) (Extension Type: boolean)
      36. PlanDefinition.action.definition[x]
      Typecanonical(ehealth-activitydefinition, ehealth-plandefinition), uri
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

      Guidance on how to interpret the contents of this table can be found here

      0. PlanDefinition
      Definition

      This resource allows for the definition of various types of plans as a sharable, consumable, and executable artifact. The resource is general enough to support the description of a broad range of clinical artifacts such as clinical decision support rules, order sets and protocols.

      ShortThe definition of a plan for a series of actions, independent of any specific patient or context
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      pdf-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.matches('[A-Z]([A-Za-z0-9_]){0,254}'))
      pdf-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.matches('[A-Z]([A-Za-z0-9_]){0,254}'))
      2. PlanDefinition.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      4. PlanDefinition.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control10..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on PlanDefinition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 6. PlanDefinition.extension:recommendation
        Slice Namerecommendation
        Definition

        Recommendation state of the plan definition

        ShortRecommendation state of the plan definition
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(recommendation) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        8. PlanDefinition.extension:intendedAudience
        Slice NameintendedAudience
        Definition

        Specifies that the resource is only intended for use in the specified organisations. Leave blank if the resource is intended for global use.

        ShortThe intended audience of the resource
        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(Intended audience) (Extension Type: Reference(ehealth-organization)referenced)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        10. PlanDefinition.extension:modifierRole
        Slice NamemodifierRole
        Definition

        This is a modifier role that can hold a role and a reference to the item who has the role. Ex. owner + a reference to the owner organization.

        ShortModifier role
        Control1..*
        This element is affected by the following invariants: ele-1
        TypeExtension(Modified role) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        12. PlanDefinition.extension:employeeTitle
        Slice NameemployeeTitle
        Definition

        Title for employed clinicians

        ShortTitle for clinicians
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(Employee title) (Extension Type: string)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        14. PlanDefinition.extension:predecessor
        Slice Namepredecessor
        Definition

        Version Predecessor

        ShortPredecessor
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(Predecessor) (Extension Type: Identifier)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        16. PlanDefinition.extension:base
        Slice Namebase
        Definition

        Version Base

        ShortBase
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(Base) (Extension Type: Identifier)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. PlanDefinition.extension:baseEnvironment
        Slice NamebaseEnvironment
        Definition

        Base environment

        ShortBase environment
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(Base environment) (Extension Type: Identifier)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. PlanDefinition.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. PlanDefinition.version
        Definition

        The identifier that is used to identify this version of the plan definition when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the plan definition author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active artifacts.

        ShortBusiness version of the plan definition
        Comments

        There may be different plan definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the plan definition with the format [url]|[version].

        NoteThis is a business version Id, not a resource version Id (see discussion)
        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. PlanDefinition.status
        Definition

        The status of this plan definition. Enables tracking the life-cycle of the content.

        Shortdraft | active | retired | unknown
        Comments

        Allows filtering of plan definitions that are appropriate for use versus not.

        Control1..1
        BindingThe codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|4.0.1
        (required to http://hl7.org/fhir/ValueSet/publication-status|4.0.1)

        The lifecycle status of an artifact.

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. PlanDefinition.jurisdiction
        Definition

        A legal or geographic region in which the plan definition is intended to be used.

        ShortIntended jurisdiction for plan definition (if applicable)
        Comments

        It may be possible for the plan definition to be used in jurisdictions other than those for which it was originally designed or intended.

        Control0..*
        BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Jurisdictionhttp://hl7.org/fhir/ValueSet/jurisdiction
        (required to http://ehealth.sundhed.dk/vs/jurisdiction)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. PlanDefinition.topic
        Definition

        Descriptive topics related to the content of the plan definition. Topics provide a high-level categorization of the definition that can be useful for filtering and searching.

        ShortE.g. Education, Treatment, Assessment
        Control0..*
        BindingThe codes SHALL be taken from For example codes, see Topic Typehttp://hl7.org/fhir/ValueSet/definition-topic
        (required to http://ehealth.sundhed.dk/vs/topic-type)
        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Repositories must be able to determine how to categorize the plan definition so that it can be found by topical searches.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. PlanDefinition.library
        Definition

        A reference to a Library resource containing any formal logic used by the plan definition.

        ShortLogic used by the plan definition
        Control0..*
        Typecanonical(ehealth-library, Library)
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be found here

        0. PlanDefinition
        Definition

        This resource allows for the definition of various types of plans as a sharable, consumable, and executable artifact. The resource is general enough to support the description of a broad range of clinical artifacts such as clinical decision support rules, order sets and protocols.

        ShortThe definition of a plan for a series of actions, independent of any specific patient or context
        Control0..*
        Is Modifierfalse
        Summaryfalse
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        pdf-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.matches('[A-Z]([A-Za-z0-9_]){0,254}'))
        2. PlanDefinition.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Is Modifierfalse
        Summarytrue
        4. PlanDefinition.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. PlanDefinition.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. PlanDefinition.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. PlanDefinition.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. PlanDefinition.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        14. PlanDefinition.extension
        Definition

        An Extension

        ShortExtension
        Control1..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on PlanDefinition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. PlanDefinition.extension:recommendation
          Slice Namerecommendation
          Definition

          Recommendation state of the plan definition

          ShortRecommendation state of the plan definition
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(recommendation) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. PlanDefinition.extension:intendedAudience
          Slice NameintendedAudience
          Definition

          Specifies that the resource is only intended for use in the specified organisations. Leave blank if the resource is intended for global use.

          ShortThe intended audience of the resource
          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension(Intended audience) (Extension Type: Reference(ehealth-organization)referenced)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          20. PlanDefinition.extension:modifierRole
          Slice NamemodifierRole
          Definition

          This is a modifier role that can hold a role and a reference to the item who has the role. Ex. owner + a reference to the owner organization.

          ShortModifier role
          Control1..*
          This element is affected by the following invariants: ele-1
          TypeExtension(Modified role) (Complex Extension)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          22. PlanDefinition.extension:employeeTitle
          Slice NameemployeeTitle
          Definition

          Title for employed clinicians

          ShortTitle for clinicians
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(Employee title) (Extension Type: string)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          24. PlanDefinition.extension:predecessor
          Slice Namepredecessor
          Definition

          Version Predecessor

          ShortPredecessor
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(Predecessor) (Extension Type: Identifier)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          26. PlanDefinition.extension:base
          Slice Namebase
          Definition

          Version Base

          ShortBase
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(Base) (Extension Type: Identifier)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          28. PlanDefinition.extension:baseEnvironment
          Slice NamebaseEnvironment
          Definition

          Base environment

          ShortBase environment
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(Base environment) (Extension Type: Identifier)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          30. PlanDefinition.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Summaryfalse
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          32. PlanDefinition.url
          Definition

          An absolute URI that is used to identify this plan definition when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this plan definition is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the plan definition is stored on different servers.

          ShortCanonical identifier for this plan definition, represented as a URI (globally unique)
          Comments

          Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

          The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

          In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the plan definition to be referenced by a single globally unique identifier.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. PlanDefinition.identifier
          Definition

          A formal identifier that is used to identify this plan definition when it is represented in other formats, or referenced in a specification, model, design or an instance.

          ShortAdditional identifier for the plan definition
          Comments

          Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this plan definition outside of FHIR, where it is not possible to use the logical URI.

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows externally provided and/or usable business identifiers to be easily associated with the module.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. PlanDefinition.version
          Definition

          The identifier that is used to identify this version of the plan definition when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the plan definition author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active artifacts.

          ShortBusiness version of the plan definition
          Comments

          There may be different plan definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the plan definition with the format [url]|[version].

          NoteThis is a business version Id, not a resource version Id (see discussion)
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. PlanDefinition.name
          Definition

          A natural language name identifying the plan definition. This name should be usable as an identifier for the module by machine processing applications such as code generation.

          ShortName for this plan definition (computer friendly)
          Comments

          The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

          Control0..1
          This element is affected by the following invariants: inv-0
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Support human navigation and code generation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. PlanDefinition.title
          Definition

          A short, descriptive, user-friendly title for the plan definition.

          ShortName for this plan definition (human friendly)
          Comments

          This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. PlanDefinition.subtitle
          Definition

          An explanatory or alternate title for the plan definition giving additional information about its content.

          ShortSubordinate title of the plan definition
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. PlanDefinition.type
          Definition

          A high-level category for the plan definition that distinguishes the kinds of systems that would be interested in the plan definition.

          Shortorder-set | clinical-protocol | eca-rule | workflow-definition
          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from PlanDefinitionType
          (extensible to http://hl7.org/fhir/ValueSet/plan-definition-type)

          The type of PlanDefinition.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. PlanDefinition.status
          Definition

          The status of this plan definition. Enables tracking the life-cycle of the content.

          Shortdraft | active | retired | unknown
          Comments

          Allows filtering of plan definitions that are appropriate for use versus not.

          Control1..1
          BindingThe codes SHALL be taken from PublicationStatus
          (required to http://hl7.org/fhir/ValueSet/publication-status|4.0.1)

          The lifecycle status of an artifact.

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. PlanDefinition.experimental
          Definition

          A Boolean value to indicate that this plan definition is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage.

          ShortFor testing purposes, not real usage
          Comments

          Allows filtering of plan definitions that are appropriate for use versus not.

          Control0..1
          Typeboolean
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Enables experimental content to be developed following the same lifecycle that would be used for a production-level plan definition.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. PlanDefinition.subject[x]
          Definition

          A code or group definition that describes the intended subject of the plan definition.

          ShortType of individual the plan definition is focused on
          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from SubjectType
          (extensible to http://hl7.org/fhir/ValueSet/subject-type)

          The possible types of subjects for a plan definition (E.g. Patient, Practitioner, Organization, Location, etc.).

          TypeChoice of: CodeableConcept, Reference(Group)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Meaning if MissingPatient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. PlanDefinition.date
          Definition

          The date (and optionally time) when the plan definition was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the plan definition changes.

          ShortDate last changed
          Comments

          Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the plan definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

          Control0..1
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Alternate NamesRevision Date
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. PlanDefinition.publisher
          Definition

          The name of the organization or individual that published the plan definition.

          ShortName of the publisher (organization or individual)
          Comments

          Usually an organization but may be an individual. The publisher (or steward) of the plan definition is the organization or individual primarily responsible for the maintenance and upkeep of the plan definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the plan definition. This item SHOULD be populated unless the information is available from context.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Helps establish the "authority/credibility" of the plan definition. May also allow for contact.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. PlanDefinition.contact
          Definition

          Contact details to assist a user in finding and communicating with the publisher.

          ShortContact details for the publisher
          Comments

          May be a web site, an email address, a telephone number, etc.

          Control0..*
          TypeContactDetail
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. PlanDefinition.description
          Definition

          A free text natural language description of the plan definition from a consumer's perspective.

          ShortNatural language description of the plan definition
          Comments

          This description can be used to capture details such as why the plan definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the plan definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the plan definition is presumed to be the predominant language in the place the plan definition was created).

          Control0..1
          Typemarkdown
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. PlanDefinition.useContext
          Definition

          The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate plan definition instances.

          ShortThe context that the content is intended to support
          Comments

          When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

          Control0..*
          TypeUsageContext
          Is Modifierfalse
          Summarytrue
          Requirements

          Assist in searching for appropriate content.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. PlanDefinition.jurisdiction
          Definition

          A legal or geographic region in which the plan definition is intended to be used.

          ShortIntended jurisdiction for plan definition (if applicable)
          Comments

          It may be possible for the plan definition to be used in jurisdictions other than those for which it was originally designed or intended.

          Control0..*
          BindingThe codes SHALL be taken from Jurisdiction
          (required to http://ehealth.sundhed.dk/vs/jurisdiction)
          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. PlanDefinition.purpose
          Definition

          Explanation of why this plan definition is needed and why it has been designed as it has.

          ShortWhy this plan definition is defined
          Comments

          This element does not describe the usage of the plan definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this plan definition.

          Control0..1
          Typemarkdown
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          66. PlanDefinition.usage
          Definition

          A detailed description of how the plan definition is used from a clinical perspective.

          ShortDescribes the clinical usage of the plan
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. PlanDefinition.copyright
          Definition

          A copyright statement relating to the plan definition and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the plan definition.

          ShortUse and/or publishing restrictions
          Control0..1
          Typemarkdown
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          Consumers must be able to determine any legal restrictions on the use of the plan definition and/or its content.

          Alternate NamesLicense, Restrictions
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          70. PlanDefinition.approvalDate
          Definition

          The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

          ShortWhen the plan definition was approved by publisher
          Comments

          The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

          Control0..1
          Typedate
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. PlanDefinition.lastReviewDate
          Definition

          The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

          ShortWhen the plan definition was last reviewed
          Comments

          If specified, this date follows the original approval date.

          Control0..1
          Typedate
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. PlanDefinition.effectivePeriod
          Definition

          The period during which the plan definition content was or is planned to be in active use.

          ShortWhen the plan definition is expected to be used
          Comments

          The effective period for a plan definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.

          Control0..1
          TypePeriod
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows establishing a transition before a resource comes into effect and also allows for a sunsetting process when new versions of the plan definition are or are expected to be used instead.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          76. PlanDefinition.topic
          Definition

          Descriptive topics related to the content of the plan definition. Topics provide a high-level categorization of the definition that can be useful for filtering and searching.

          ShortE.g. Education, Treatment, Assessment
          Control0..*
          BindingThe codes SHALL be taken from Topic Type
          (required to http://ehealth.sundhed.dk/vs/topic-type)
          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          Repositories must be able to determine how to categorize the plan definition so that it can be found by topical searches.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          78. PlanDefinition.author
          Definition

          An individiual or organization primarily involved in the creation and maintenance of the content.

          ShortWho authored the content
          Control0..*
          TypeContactDetail
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          80. PlanDefinition.editor
          Definition

          An individual or organization primarily responsible for internal coherence of the content.

          ShortWho edited the content
          Control0..*
          TypeContactDetail
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          82. PlanDefinition.reviewer
          Definition

          An individual or organization primarily responsible for review of some aspect of the content.

          ShortWho reviewed the content
          Control0..*
          TypeContactDetail
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          84. PlanDefinition.endorser
          Definition

          An individual or organization responsible for officially endorsing the content for use in some setting.

          ShortWho endorsed the content
          Control0..*
          TypeContactDetail
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          86. PlanDefinition.relatedArtifact
          Definition

          Related artifacts such as additional documentation, justification, or bibliographic references.

          ShortAdditional documentation, citations
          Comments

          Each related artifact is either an attachment, or a reference to another resource, but not both.

          Control0..*
          TypeRelatedArtifact
          Is Modifierfalse
          Summaryfalse
          Requirements

          Plan definitions must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          88. PlanDefinition.library
          Definition

          A reference to a Library resource containing any formal logic used by the plan definition.

          ShortLogic used by the plan definition
          Control0..*
          Typecanonical(ehealth-library)
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          90. PlanDefinition.goal
          Definition

          Goals that describe what the activities within the plan are intended to achieve. For example, weight loss, restoring an activity of daily living, obtaining herd immunity via immunization, meeting a process improvement objective, etc.

          ShortWhat the plan is trying to accomplish
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Summaryfalse
          Requirements

          Goal information needs to be captured for order sets, protocols, and care plan definitions to better describe the objectives of the protocol activities and to guide the creation of specific goals within the derived care plans and orders.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          92. PlanDefinition.goal.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          94. PlanDefinition.goal.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          96. PlanDefinition.goal.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          98. PlanDefinition.goal.category
          Definition

          Indicates a category the goal falls within.

          ShortE.g. Treatment, dietary, behavioral
          Control0..1
          BindingFor example codes, see GoalCategory
          (example to http://hl7.org/fhir/ValueSet/goal-category)

          Example codes for grouping goals for filtering or presentation.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          100. PlanDefinition.goal.description
          Definition

          Human-readable and/or coded description of a specific desired objective of care, such as "control blood pressure" or "negotiate an obstacle course" or "dance with child at wedding".

          ShortCode or text describing the goal
          Comments

          If no code is available, use CodeableConcept.text.

          Control1..1
          BindingFor example codes, see SNOMEDCTClinicalFindings
          (example to http://hl7.org/fhir/ValueSet/clinical-findings)

          Describes goals that can be achieved.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          102. PlanDefinition.goal.priority
          Definition

          Identifies the expected level of importance associated with reaching/sustaining the defined goal.

          Shorthigh-priority | medium-priority | low-priority
          Control0..1
          BindingThe codes SHOULD be taken from GoalPriority
          (preferred to http://hl7.org/fhir/ValueSet/goal-priority)

          Indicates the level of importance associated with reaching or sustaining a goal.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          104. PlanDefinition.goal.start
          Definition

          The event after which the goal should begin being pursued.

          ShortWhen goal pursuit begins
          Control0..1
          BindingFor example codes, see GoalStartEvent
          (example to http://hl7.org/fhir/ValueSet/goal-start-event)

          Identifies the types of events that might trigger the start of a goal.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          106. PlanDefinition.goal.addresses
          Definition

          Identifies problems, conditions, issues, or concerns the goal is intended to address.

          ShortWhat does the goal address
          Control0..*
          BindingFor example codes, see Condition/Problem/DiagnosisCodes
          (example to http://hl7.org/fhir/ValueSet/condition-code)

          Identifies problems, conditions, issues, or concerns that goals may address.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          108. PlanDefinition.goal.documentation
          Definition

          Didactic or other informational resources associated with the goal that provide further supporting information about the goal. Information resources can include inline text commentary and links to web resources.

          ShortSupporting documentation for the goal
          Control0..*
          TypeRelatedArtifact
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          110. PlanDefinition.goal.target
          Definition

          Indicates what should be done and within what timeframe.

          ShortTarget outcome for the goal
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          112. PlanDefinition.goal.target.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          114. PlanDefinition.goal.target.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          116. PlanDefinition.goal.target.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          118. PlanDefinition.goal.target.measure
          Definition

          The parameter whose value is to be tracked, e.g. body weight, blood pressure, or hemoglobin A1c level.

          ShortThe parameter whose value is to be tracked
          Control0..1
          BindingFor example codes, see LOINCCodes
          (example to http://hl7.org/fhir/ValueSet/observation-codes)

          Identifies types of parameters that can be tracked to determine goal achievement.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          120. PlanDefinition.goal.target.detail[x]
          Definition

          The target value of the measure to be achieved to signify fulfillment of the goal, e.g. 150 pounds or 7.0%. Either the high or low or both values of the range can be specified. When a low value is missing, it indicates that the goal is achieved at any value at or below the high value. Similarly, if the high value is missing, it indicates that the goal is achieved at any value at or above the low value.

          ShortThe target value to be achieved
          Control0..1
          TypeChoice of: Quantity, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          122. PlanDefinition.goal.target.due
          Definition

          Indicates the timeframe after the start of the goal in which the goal should be met.

          ShortReach goal within
          Control0..1
          TypeDuration
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          124. PlanDefinition.action
          Definition

          An action or group of actions to be taken as part of the plan.

          ShortAction defined by the plan
          Comments

          Note that there is overlap between many of the elements defined here and the ActivityDefinition resource. When an ActivityDefinition is referenced (using the definition element), the overlapping elements in the plan override the content of the referenced ActivityDefinition unless otherwise documented in the specific elements. See the PlanDefinition resource for more detailed information.

          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          126. PlanDefinition.action.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          128. PlanDefinition.action.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on PlanDefinition.action.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 130. PlanDefinition.action.extension:overviewUsageMode
            Slice NameoverviewUsageMode
            Definition

            Identifies whether the specified element and/or results of the element should appear in overview or table presentation.

            ShortIdentifies whether the specified element and/or results of the element should appear in overview or table presentation.
            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(Overview usage mode) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            132. PlanDefinition.action.extension:ehealth-actionTrigger
            Slice Nameehealth-actionTrigger
            Definition

            Defines a reaction along with its trigger conditions.

            ShortReaction and trigger conditions
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Action Trigger) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            134. PlanDefinition.action.extension:includeAsExtra
            Slice NameincludeAsExtra
            Definition

            Used to mark that the action/service request may be performed as extra, meaning the action/service request may also be performed outside the resolved timing slots.

            ShortUsed to mark that the action/service request may be performed as extra, meaning the action/service request may also be performed outside the resolved timing slots.
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(includeAsExtra) (Extension Type: boolean)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            136. PlanDefinition.action.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            138. PlanDefinition.action.prefix
            Definition

            A user-visible prefix for the action.

            ShortUser-visible prefix for the action (e.g. 1. or A.)
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            140. PlanDefinition.action.title
            Definition

            The title of the action displayed to a user.

            ShortUser-visible title
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            142. PlanDefinition.action.description
            Definition

            A brief description of the action used to provide a summary to display to the user.

            ShortBrief description of the action
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            144. PlanDefinition.action.textEquivalent
            Definition

            A text equivalent of the action to be performed. This provides a human-interpretable description of the action when the definition is consumed by a system that might not be capable of interpreting it dynamically.

            ShortStatic text equivalent of the action, used if the dynamic aspects cannot be interpreted by the receiving system
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            146. PlanDefinition.action.priority
            Definition

            Indicates how quickly the action should be addressed with respect to other actions.

            Shortroutine | urgent | asap | stat
            Control0..1
            BindingThe codes SHALL be taken from RequestPriority
            (required to http://hl7.org/fhir/ValueSet/request-priority|4.0.1)

            Identifies the level of importance to be assigned to actioning the request.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            148. PlanDefinition.action.code
            Definition

            A code that provides meaning for the action or action group. For example, a section may have a LOINC code for the section of a documentation template.

            ShortCode representing the meaning of the action or sub-actions
            Control0..*
            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            150. PlanDefinition.action.reason
            Definition

            A description of why this action is necessary or appropriate.

            ShortWhy the action should be performed
            Comments

            This is different than the clinical evidence documentation, it's an actual business description of the reason for performing the action.

            Control0..*
            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            152. PlanDefinition.action.documentation
            Definition

            Didactic or other informational resources associated with the action that can be provided to the CDS recipient. Information resources can include inline text commentary and links to web resources.

            ShortSupporting documentation for the intended performer of the action
            Control0..*
            TypeRelatedArtifact
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            154. PlanDefinition.action.goalId
            Definition

            Identifies goals that this action supports. The reference must be to a goal element defined within this plan definition.

            ShortWhat goals this action supports
            Control0..*
            Typeid
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            156. PlanDefinition.action.subject[x]
            Definition

            A code or group definition that describes the intended subject of the action and its children, if any.

            ShortType of individual the action is focused on
            Comments

            The subject of an action overrides the subject at a parent action or on the root of the PlanDefinition if specified.

            In addition, because the subject needs to be resolved during realization, use of subjects in actions (or in the ActivityDefinition referenced by the action) resolves based on the set of subjects supplied in context and by type (i.e. the patient subject would resolve to a resource of type Patient).

            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from SubjectType
            (extensible to http://hl7.org/fhir/ValueSet/subject-type)

            The possible types of subjects for a plan definition (E.g. Patient, Practitioner, Organization, Location, etc.).

            TypeChoice of: CodeableConcept, Reference(Group)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summaryfalse
            Requirements

            Multiple steps in a protocol often have different groups of steps that are focused on testing different things. The subject of an action specifies the focus of the action and any child actions.

            Meaning if MissingPatient
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            158. PlanDefinition.action.trigger
            Definition

            A description of when the action should be triggered.

            ShortWhen the action should be triggered
            Control0..*
            TypeTriggerDefinition
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            160. PlanDefinition.action.condition
            Definition

            An expression that describes applicability criteria or start/stop conditions for the action.

            ShortWhether or not the action is applicable
            Comments

            When multiple conditions of the same kind are present, the effects are combined using AND semantics, so the overall condition is true only if all the conditions are true.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            162. PlanDefinition.action.condition.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            164. PlanDefinition.action.condition.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            166. PlanDefinition.action.condition.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            168. PlanDefinition.action.condition.kind
            Definition

            The kind of condition.

            Shortapplicability | start | stop
            Comments

            Applicability criteria are used to determine immediate applicability when a plan definition is applied to a given context. Start and stop criteria are carried through application and used to describe enter/exit criteria for an action.

            Control1..1
            BindingThe codes SHALL be taken from ActionConditionKind
            (required to http://hl7.org/fhir/ValueSet/action-condition-kind|4.0.1)

            Defines the kinds of conditions that can appear on actions.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            170. PlanDefinition.action.condition.expression
            Definition

            An expression that returns true or false, indicating whether the condition is satisfied.

            ShortBoolean-valued expression
            Comments

            The expression may be inlined or may be a reference to a named expression within a logic library referenced by the library element.

            Control0..1
            TypeExpression
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            172. PlanDefinition.action.input
            Definition

            Defines input data requirements for the action.

            ShortInput data requirements
            Control0..*
            TypeDataRequirement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            174. PlanDefinition.action.output
            Definition

            Defines the outputs of the action, if any.

            ShortOutput data definition
            Control0..*
            TypeDataRequirement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            176. PlanDefinition.action.relatedAction
            Definition

            A relationship to another action such as "before" or "30-60 minutes after start of".

            ShortRelationship to another action
            Comments

            When an action depends on multiple actions, the meaning is that all actions are dependencies, rather than that any of the actions are a dependency.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            178. PlanDefinition.action.relatedAction.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            180. PlanDefinition.action.relatedAction.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            182. PlanDefinition.action.relatedAction.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            184. PlanDefinition.action.relatedAction.actionId
            Definition

            The element id of the related action.

            ShortWhat action is this related to
            Control1..1
            Typeid
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            186. PlanDefinition.action.relatedAction.relationship
            Definition

            The relationship of this action to the related action.

            Shortbefore-start | before | before-end | concurrent-with-start | concurrent | concurrent-with-end | after-start | after | after-end
            Control1..1
            BindingThe codes SHALL be taken from ActionRelationshipType
            (required to http://hl7.org/fhir/ValueSet/action-relationship-type|4.0.1)

            Defines the types of relationships between actions.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            188. PlanDefinition.action.relatedAction.offset[x]
            Definition

            A duration or range of durations to apply to the relationship. For example, 30-60 minutes before.

            ShortTime offset for the relationship
            Control0..1
            TypeChoice of: Duration, Range
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            190. PlanDefinition.action.timing[x]
            Definition

            An optional value describing when the action should be performed.

            ShortWhen the action should take place
            Control0..1
            TypeChoice of: dateTime, Age, Period, Duration, Range, Timing
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            192. PlanDefinition.action.participant
            Definition

            Indicates who should participate in performing the action described.

            ShortWho should participate in the action
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            194. PlanDefinition.action.participant.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            196. PlanDefinition.action.participant.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            198. PlanDefinition.action.participant.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            200. PlanDefinition.action.participant.type
            Definition

            The type of participant in the action.

            Shortpatient | practitioner | related-person | device
            Control1..1
            BindingThe codes SHALL be taken from ActionParticipantType
            (required to http://hl7.org/fhir/ValueSet/action-participant-type|4.0.1)

            The type of participant for the action.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            202. PlanDefinition.action.participant.role
            Definition

            The role the participant should play in performing the described action.

            ShortE.g. Nurse, Surgeon, Parent
            Control0..1
            BindingFor example codes, see ActionParticipantRole
            (example to http://hl7.org/fhir/ValueSet/action-participant-role)

            Defines roles played by participants for the action.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            204. PlanDefinition.action.type
            Definition

            The type of action to perform (create, update, remove).

            Shortcreate | update | remove | fire-event
            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from ActionType
            (extensible to http://hl7.org/fhir/ValueSet/action-type)

            The type of action to be performed.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            206. PlanDefinition.action.groupingBehavior
            Definition

            Defines the grouping behavior for the action and its children.

            Shortvisual-group | logical-group | sentence-group
            Control0..1
            BindingThe codes SHALL be taken from ActionGroupingBehavior
            (required to http://hl7.org/fhir/ValueSet/action-grouping-behavior|4.0.1)

            Defines organization behavior of a group.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            208. PlanDefinition.action.selectionBehavior
            Definition

            Defines the selection behavior for the action and its children.

            Shortany | all | all-or-none | exactly-one | at-most-one | one-or-more
            Control0..1
            BindingThe codes SHALL be taken from ActionSelectionBehavior
            (required to http://hl7.org/fhir/ValueSet/action-selection-behavior|4.0.1)

            Defines selection behavior of a group.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            210. PlanDefinition.action.requiredBehavior
            Definition

            Defines the required behavior for the action.

            Shortmust | could | must-unless-documented
            Control0..1
            BindingThe codes SHALL be taken from ActionRequiredBehavior
            (required to http://hl7.org/fhir/ValueSet/action-required-behavior|4.0.1)

            Defines expectations around whether an action or action group is required.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            212. PlanDefinition.action.precheckBehavior
            Definition

            Defines whether the action should usually be preselected.

            Shortyes | no
            Control0..1
            BindingThe codes SHALL be taken from ActionPrecheckBehavior
            (required to http://hl7.org/fhir/ValueSet/action-precheck-behavior|4.0.1)

            Defines selection frequency behavior for an action or group.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            214. PlanDefinition.action.cardinalityBehavior
            Definition

            Defines whether the action can be selected multiple times.

            Shortsingle | multiple
            Control0..1
            BindingThe codes SHALL be taken from ActionCardinalityBehavior
            (required to http://hl7.org/fhir/ValueSet/action-cardinality-behavior|4.0.1)

            Defines behavior for an action or a group for how many times that item may be repeated.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            216. PlanDefinition.action.definition[x]
            Definition

            A reference to an ActivityDefinition that describes the action to be taken in detail, or a PlanDefinition that describes a series of actions to be taken.

            ShortDescription of the activity to be performed
            Comments

            Note that the definition is optional, and if no definition is specified, a dynamicValue with a root ($this) path can be used to define the entire resource dynamically.

            Control0..1
            Typecanonical(ehealth-activitydefinition, ehealth-plandefinition)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            218. PlanDefinition.action.transform
            Definition

            A reference to a StructureMap resource that defines a transform that can be executed to produce the intent resource using the ActivityDefinition instance as the input.

            ShortTransform to apply the template
            Comments

            Note that when a referenced ActivityDefinition also defines a transform, the transform specified here generally takes precedence. In addition, if both a transform and dynamic values are specific, the dynamic values are applied to the result of the transform.

            Control0..1
            Typecanonical(StructureMap)
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            220. PlanDefinition.action.dynamicValue
            Definition

            Customizations that should be applied to the statically defined resource. For example, if the dosage of a medication must be computed based on the patient's weight, a customization would be used to specify an expression that calculated the weight, and the path on the resource that would contain the result.

            ShortDynamic aspects of the definition
            Comments

            Dynamic values are applied in the order in which they are defined in the PlanDefinition resource. Note that when dynamic values are also specified by a referenced ActivityDefinition, the dynamicValues from the ActivityDefinition are applied first, followed by the dynamicValues specified here. In addition, if both a transform and dynamic values are specific, the dynamic values are applied to the result of the transform.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            222. PlanDefinition.action.dynamicValue.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            224. PlanDefinition.action.dynamicValue.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            226. PlanDefinition.action.dynamicValue.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            228. PlanDefinition.action.dynamicValue.path
            Definition

            The path to the element to be customized. This is the path on the resource that will hold the result of the calculation defined by the expression. The specified path SHALL be a FHIRPath resolveable on the specified target type of the ActivityDefinition, and SHALL consist only of identifiers, constant indexers, and a restricted subset of functions. The path is allowed to contain qualifiers (.) to traverse sub-elements, as well as indexers ([x]) to traverse multiple-cardinality sub-elements (see the Simple FHIRPath Profile for full details).

            ShortThe path to the element to be set dynamically
            Comments

            To specify the path to the current action being realized, the %action environment variable is available in this path. For example, to specify the description element of the target action, the path would be %action.description. The path attribute contains a Simple FHIRPath Subset that allows path traversal, but not calculation.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            230. PlanDefinition.action.dynamicValue.expression
            Definition

            An expression specifying the value of the customized element.

            ShortAn expression that provides the dynamic value for the customization
            Comments

            The expression may be inlined or may be a reference to a named expression within a logic library referenced by the library element.

            Control0..1
            TypeExpression
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            232. PlanDefinition.action.action
            Definition

            Sub actions that are contained within the action. The behavior of this action determines the functionality of the sub-actions. For example, a selection behavior of at-most-one indicates that of the sub-actions, at most one may be chosen as part of realizing the action definition.

            ShortA sub-action
            Control0..*
            TypeSeettp://hl7.org/fhir/StructureDefinition/PlanDefinition#PlanDefinition.action
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))