eHealth Infrastructure
3.2.0 - release

This page is part of the FUT Infrastructure (v3.2.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: ehealth-task

Official URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task Version: 3.2.0
Active as of 2024-09-02 Computable Name: ehealth-task

Introduction

A task resource describes an activity that can be performed and tracks the state of completion of that activity. It is a representation that an activity should be or has been initiated, and eventually, represents the successful or unsuccessful completion of that activity.

Scope and Usage

In scope of the eHealth Infrastructure, the Task resource is used for:

  • tracking an activity to be performed by a Practitioner, CareTeam or Organization. The entity responsible for performing the Task is identified through the extension ehealth-task-responsible.
  • coordinating which Practitioner has assigned or been assigned a Task. This is identified through owner.

Task resources are produced by the eHealth Infrastructure as reaction to measurements being submitted, measurements being submitted at odd timing or expected measurements not being submitted. Measurements in the form of Observation, QuestionnaireResponse or other resources are expected to be submitted by a Patient according to a measurement regime specified in a CarePlan and referenced CarePlan/ServiceRequest.

The context in which the Task is created is identified through episodeOfCare. The focus element describes what resource the Task responsible should be acting on and can reference any resource. The for element can contain a reference to a Patient and shall be specified if the Task pertains to a Patient as subject. In case episodeOfCare references an EpisodeOfCare, it is enforced that for references the same Patient as is referenced in the EpisodeOfCare."

Use of Task for coordinating assessment of submitted measurement

The eHealth Infrastructure supports that automated processing rules can be defined as Library resources, attached to plans (through the complex of PlanDefinition/ActivityDefinition/Library and CarePlan/ServiceRequest) and applied to submitted measurements. This includes automated processing rules performing triaging based on comparison of submitted measurements against reference ranges specified in CarePlan/ServiceRequest.

The definition of each automated processing rule controls whether to create the following as a result of the applying the rule:

  • zero, one or more Communication resources of profile ehealth-message
  • zero, one or more Task resources of profile ehealth-task
  • zero, one or more ClinicalImpression resources of profile ehealth-clinicalimpression

A typical result of triaging, for instance, is expected to be:

  • A Communication referring to a Task - creation of this might depend on Task.priority being other than routine
  • A Task with focus set to the ClinicalImpression
  • A ClinicalImpression referring to a measurement (Observation, QuestionnaireResponse or Media)

In case no automated processing rule has been attached to the plan, the current fallback automated processing rule creates a Task that refers to a single measurement. This, however, could change.

A typical Task created by triaging is expected to have:

  • Task category is a coding that states need to assess a triaging result
  • Task ehealth-task-responsible that references the one or more CareTeam attached to the CarePlan
  • Task ehealth-restriction-category is a coding that can be used to restrict access to the task, for instance restricting a task so only CareTeam members involved in monitoring measurements can access it
  • Task priority reflecting the urgency set by the triaging rule
  • Task focus referencing the ClinicalImpression that was also created during triaging. Focus can be overridden by the automated processing rule to reference something different than the ClinicalImpression.

Use of Task for resolving missing measurement

In case the eHealth Infrastructure detects that a measurement submission is missing, it creates a Communication for the CareTeam(s) attached to the CarePlan stating that the Patient should be reminded to follow the measurement regime. It also creates a Task where:

  • Task category is a coding that states need to resolve why measurement submission is missing
  • Task ehealth-task-responsible references the one or more CareTeam attached to the CarePlan
  • Task ehealth-restriction-category is a coding that can be used to restrict access to the task, for instance restricting a task so only CareTeam members involved in monitoring measurements can access it
  • Task priority set to routine
  • Task focus references the ServiceRequest for the missing measurement

Use of Task for unexpected measurement

In case the eHealth Infrastructure detects a measurement submission at unexpected or odd time compared to the measurement regime, it creates a Task where:

  • Task category is a coding that states need to resolve unexpected measurement submission* Task ehealth-task-responsible references the one or more CareTeam attached to the CarePlan
  • Task ehealth-restriction-category is a coding that can be used to restrict access to the task, for instance restricting a task so only CareTeam members involved in monitoring measurements can access it
  • Task priority set to routine
  • Task focus references Observation, QuestionnaireResponse or Media (the measurement)

No use of Task for coordinating measuring to be performed by Patient

No Task resources are created to assist in adhering to a measurement regime.

Use of Task in coordinating activities across multiple patients

The Task extension ehealth-task-responsible enables that multiple entities (CareTeam, Practitioner, Patient, RelatedPerson) can be responsible for the Task. It is expected, for instance, that each CareTeam will provide support/monitoring of multiple patients. The Task resources for which a CareTeam is responsible can form a list sorted by priority to support triaging.

When a Task has been assigned to a particular individual (through Task owner) it is possible for the Task responsible(s) to reassign the Task. This way, CareTeam members can coordinate Task assignments (by adding Practitioner as Task owner and setting Task status) while preserving the CareTeam as fallback in case the Practitioner is unable to process the Task, for instance due to absence.

Usage:

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

This structure is derived from Task

NameFlagsCard.TypeDescription & Constraintsdoco
.. Task 0..* Task A task to be performed
... Slices for extension 4..* Extension Extension
Slice: Unordered, Open by value:url
.... episodeOfCare 1..1 Reference(ehealth-episodeofcare) {r} EpisodeOfCare
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-episodeOfCare
.... taskCategory 1..1 CodeableConcept Category of task.
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-category
Binding: Task Category (required)
.... taskResponsible 1..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | ehealth-careteam) Responsible entity
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-responsible
.... restrictionCategory 1..* CodeableConcept Restriction category
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-restriction-category
Binding: Restriction Category (required)
.... resolvedTiming 0..1 (Complex) Resolved Timing
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing
... groupIdentifier
.... assigner 0..1 Reference(ehealth-organization) {r} Organization that issued id (may be just text)
... partOf 0..* Reference(ehealth-task) {r} Composite task
... priority S 1..1 code routine | urgent | asap | stat
... requester 0..1 Reference(ehealth-device | ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Who is asking for task to be done
... owner 0..1 Reference(ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Responsible individual
... note
.... Slices for author[x] 0..1 Reference(Practitioner | Patient | RelatedPerson | Organization), string Individual responsible for the annotation
Slice: Unordered, Open by type:$this
..... author[x]:authorReference 0..1 Reference(ehealth-practitioner | ehealth-patient | ehealth-relatedperson) Individual responsible for the annotation
..... author[x]:authorString 0..1 string Individual responsible for the annotation
... relevantHistory 0..* Reference(ehealth-provenance) {r} Key events in history of the Task
... restriction
.... recipient 0..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | Group | ehealth-organization) {r} For whom is fulfillment sought?

doco Documentation for this format
NameFlagsCard.TypeDescription & Constraintsdoco
.. Task C 0..* Task A task to be performed
inv-1: Last modified date must be greater than or equal to authored-on date.
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... Slices for extension 4..* Extension Extension
Slice: Unordered, Open by value:url
.... episodeOfCare 1..1 Reference(ehealth-episodeofcare) {r} EpisodeOfCare
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-episodeOfCare
.... taskCategory 1..1 CodeableConcept Category of task.
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-category
Binding: Task Category (required)
.... taskResponsible 1..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | ehealth-careteam) Responsible entity
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-responsible
.... restrictionCategory 1..* CodeableConcept Restriction category
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-restriction-category
Binding: Restriction Category (required)
.... resolvedTiming 0..1 (Complex) Resolved Timing
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... status ?!Σ 1..1 code draft | requested | received | accepted | +
Binding: TaskStatus (required): The current status of the task.

... intent SΣ 1..1 code unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order.

... priority S 1..1 code routine | urgent | asap | stat
Binding: RequestPriority (required): The task's priority.

... requester Σ 0..1 Reference(ehealth-device | ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Who is asking for task to be done
... owner Σ 0..1 Reference(ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Responsible individual
... relevantHistory 0..* Reference(ehealth-provenance) {r} Key events in history of the Task

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Task.statusrequiredTaskStatus
http://hl7.org/fhir/ValueSet/task-status|4.0.1
from the FHIR Standard
Task.intentrequiredTaskIntent
http://hl7.org/fhir/ValueSet/task-intent|4.0.1
from the FHIR Standard
Task.priorityrequiredRequestPriority
http://hl7.org/fhir/ValueSet/request-priority|4.0.1
from the FHIR Standard
NameFlagsCard.TypeDescription & Constraintsdoco
.. Task C 0..* Task A task to be performed
inv-1: Last modified date must be greater than or equal to authored-on date.
... id Σ 0..1 id Logical id of this artifact
... meta Σ 0..1 Meta Metadata about the resource
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
... contained 0..* Resource Contained, inline Resources
... Slices for extension 4..* Extension Extension
Slice: Unordered, Open by value:url
.... episodeOfCare 1..1 Reference(ehealth-episodeofcare) {r} EpisodeOfCare
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-episodeOfCare
.... taskCategory 1..1 CodeableConcept Category of task.
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-category
Binding: Task Category (required)
.... taskResponsible 1..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | ehealth-careteam) Responsible entity
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-responsible
.... restrictionCategory 1..* CodeableConcept Restriction category
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-restriction-category
Binding: Restriction Category (required)
.... resolvedTiming 0..1 (Complex) Resolved Timing
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier 0..* Identifier Task Instance Identifier
... instantiatesCanonical Σ 0..1 canonical(ActivityDefinition) Formal definition of task
... instantiatesUri Σ 0..1 uri Formal definition of task
... basedOn Σ 0..* Reference(Resource) Request fulfilled by this task
... groupIdentifier Σ 0..1 Identifier Requisition or grouper id
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... use ?!Σ 0..1 code usual | official | temp | secondary | old (If known)
Binding: IdentifierUse (required): Identifies the purpose for this identifier, if known .

.... type Σ 0..1 CodeableConcept Description of identifier
Binding: Identifier Type Codes (extensible): A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

.... system Σ 0..1 uri The namespace for the identifier value
Example General: http://www.acme.com/identifiers/patient
.... value Σ 0..1 string The value that is unique
Example General: 123456
.... period Σ 0..1 Period Time period when id is/was valid for use
.... assigner Σ 0..1 Reference(ehealth-organization) {r} Organization that issued id (may be just text)
... partOf Σ 0..* Reference(ehealth-task) {r} Composite task
... status ?!Σ 1..1 code draft | requested | received | accepted | +
Binding: TaskStatus (required): The current status of the task.

... statusReason Σ 0..1 CodeableConcept Reason for current status
Binding Description (No ValueSet): (example): Codes to identify the reason for current status. These will typically be specific to a particular workflow.

... businessStatus Σ 0..1 CodeableConcept E.g. "Specimen collected", "IV prepped"
Binding Description (No ValueSet): (example): The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.

... intent SΣ 1..1 code unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order.

... priority S 1..1 code routine | urgent | asap | stat
Binding: RequestPriority (required): The task's priority.

... code Σ 0..1 CodeableConcept Task Type
Binding: TaskCode (example): Codes to identify what the task involves. These will typically be specific to a particular workflow.

... description Σ 0..1 string Human-readable explanation of task
... focus Σ 0..1 Reference(Resource) What task is acting on
... for Σ 0..1 Reference(Resource) Beneficiary of the Task
... encounter Σ 0..1 Reference(Encounter) Healthcare event during which this task originated
... executionPeriod Σ 0..1 Period Start and end time of execution
... authoredOn C 0..1 dateTime Task Creation Date
... lastModified ΣC 0..1 dateTime Task Last Modified Date
... requester Σ 0..1 Reference(ehealth-device | ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Who is asking for task to be done
... performerType 0..* CodeableConcept Requested performer
Binding: ProcedurePerformerRoleCodes (preferred): The type(s) of task performers allowed.


... owner Σ 0..1 Reference(ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Responsible individual
... location Σ 0..1 Reference(Location) Where task occurs
... reasonCode 0..1 CodeableConcept Why task is needed
Binding Description (No ValueSet): (example): Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.

... reasonReference 0..1 Reference(Resource) Why task is needed
... insurance 0..* Reference(Coverage | ClaimResponse) Associated insurance coverage
... note 0..* Annotation Comments made about the task
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... Slices for author[x] Σ 0..1 Individual responsible for the annotation
Slice: Unordered, Closed by type:$this
..... authorReference Reference(Practitioner | Patient | RelatedPerson | Organization)
..... authorString string
..... author[x]:authorReference Σ 0..1 Reference(ehealth-practitioner | ehealth-patient | ehealth-relatedperson) Individual responsible for the annotation
..... author[x]:authorString Σ 0..1 string Individual responsible for the annotation
.... time Σ 0..1 dateTime When the annotation was made
.... text Σ 1..1 markdown The annotation - text content (as markdown)
... relevantHistory 0..* Reference(ehealth-provenance) {r} Key events in history of the Task
... restriction 0..1 BackboneElement Constraints on fulfillment tasks
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... repetitions 0..1 positiveInt How many times to repeat
.... period 0..1 Period When fulfillment sought
.... recipient 0..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | Group | ehealth-organization) {r} For whom is fulfillment sought?
... input 0..* BackboneElement Information used to perform task
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... type 1..1 CodeableConcept Label for the input
Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

.... value[x] 1..1 Content to use in performing the task
..... valueBase64Binary base64Binary
..... valueBoolean boolean
..... valueCanonical canonical(Any)
..... valueCode code
..... valueDate date
..... valueDateTime dateTime
..... valueDecimal decimal
..... valueId id
..... valueInstant instant
..... valueInteger integer
..... valueMarkdown markdown
..... valueOid oid
..... valuePositiveInt positiveInt
..... valueString string
..... valueTime time
..... valueUnsignedInt unsignedInt
..... valueUri uri
..... valueUrl url
..... valueUuid uuid
..... valueAddress Address
..... valueAge Age
..... valueAnnotation Annotation
..... valueAttachment Attachment
..... valueCodeableConcept CodeableConcept
..... valueCoding Coding
..... valueContactPoint ContactPoint
..... valueCount Count
..... valueDistance Distance
..... valueDuration Duration
..... valueHumanName HumanName
..... valueIdentifier Identifier
..... valueMoney Money
..... valuePeriod Period
..... valueQuantity Quantity
..... valueRange Range
..... valueRatio Ratio
..... valueReference Reference(Any)
..... valueSampledData SampledData
..... valueSignature Signature
..... valueTiming Timing
..... valueContactDetail ContactDetail
..... valueContributor Contributor
..... valueDataRequirement DataRequirement
..... valueExpression Expression
..... valueParameterDefinition ParameterDefinition
..... valueRelatedArtifact RelatedArtifact
..... valueTriggerDefinition TriggerDefinition
..... valueUsageContext UsageContext
..... valueDosage Dosage
..... valueMeta Meta
... output 0..* BackboneElement Information produced as part of task
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... type 1..1 CodeableConcept Label for output
Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

.... value[x] 1..1 Result of output
..... valueBase64Binary base64Binary
..... valueBoolean boolean
..... valueCanonical canonical(Any)
..... valueCode code
..... valueDate date
..... valueDateTime dateTime
..... valueDecimal decimal
..... valueId id
..... valueInstant instant
..... valueInteger integer
..... valueMarkdown markdown
..... valueOid oid
..... valuePositiveInt positiveInt
..... valueString string
..... valueTime time
..... valueUnsignedInt unsignedInt
..... valueUri uri
..... valueUrl url
..... valueUuid uuid
..... valueAddress Address
..... valueAge Age
..... valueAnnotation Annotation
..... valueAttachment Attachment
..... valueCodeableConcept CodeableConcept
..... valueCoding Coding
..... valueContactPoint ContactPoint
..... valueCount Count
..... valueDistance Distance
..... valueDuration Duration
..... valueHumanName HumanName
..... valueIdentifier Identifier
..... valueMoney Money
..... valuePeriod Period
..... valueQuantity Quantity
..... valueRange Range
..... valueRatio Ratio
..... valueReference Reference(Any)
..... valueSampledData SampledData
..... valueSignature Signature
..... valueTiming Timing
..... valueContactDetail ContactDetail
..... valueContributor Contributor
..... valueDataRequirement DataRequirement
..... valueExpression Expression
..... valueParameterDefinition ParameterDefinition
..... valueRelatedArtifact RelatedArtifact
..... valueTriggerDefinition TriggerDefinition
..... valueUsageContext UsageContext
..... valueDosage Dosage
..... valueMeta Meta

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Task.languagepreferredCommonLanguages
Additional Bindings Purpose
AllLanguages Max Binding
http://hl7.org/fhir/ValueSet/languages
from the FHIR Standard
Task.groupIdentifier.userequiredIdentifierUse
http://hl7.org/fhir/ValueSet/identifier-use|4.0.1
from the FHIR Standard
Task.groupIdentifier.typeextensibleIdentifier Type Codes
http://hl7.org/fhir/ValueSet/identifier-type
from the FHIR Standard
Task.statusrequiredTaskStatus
http://hl7.org/fhir/ValueSet/task-status|4.0.1
from the FHIR Standard
Task.statusReasonexample
Task.businessStatusexample
Task.intentrequiredTaskIntent
http://hl7.org/fhir/ValueSet/task-intent|4.0.1
from the FHIR Standard
Task.priorityrequiredRequestPriority
http://hl7.org/fhir/ValueSet/request-priority|4.0.1
from the FHIR Standard
Task.codeexampleTaskCode
http://hl7.org/fhir/ValueSet/task-code
from the FHIR Standard
Task.performerTypepreferredProcedurePerformerRoleCodes
http://hl7.org/fhir/ValueSet/performer-role
from the FHIR Standard
Task.reasonCodeexample
Task.input.typeexample
Task.output.typeexample

Differential View

This structure is derived from Task

NameFlagsCard.TypeDescription & Constraintsdoco
.. Task 0..* Task A task to be performed
... Slices for extension 4..* Extension Extension
Slice: Unordered, Open by value:url
.... episodeOfCare 1..1 Reference(ehealth-episodeofcare) {r} EpisodeOfCare
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-episodeOfCare
.... taskCategory 1..1 CodeableConcept Category of task.
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-category
Binding: Task Category (required)
.... taskResponsible 1..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | ehealth-careteam) Responsible entity
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-responsible
.... restrictionCategory 1..* CodeableConcept Restriction category
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-restriction-category
Binding: Restriction Category (required)
.... resolvedTiming 0..1 (Complex) Resolved Timing
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing
... groupIdentifier
.... assigner 0..1 Reference(ehealth-organization) {r} Organization that issued id (may be just text)
... partOf 0..* Reference(ehealth-task) {r} Composite task
... priority S 1..1 code routine | urgent | asap | stat
... requester 0..1 Reference(ehealth-device | ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Who is asking for task to be done
... owner 0..1 Reference(ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Responsible individual
... note
.... Slices for author[x] 0..1 Reference(Practitioner | Patient | RelatedPerson | Organization), string Individual responsible for the annotation
Slice: Unordered, Open by type:$this
..... author[x]:authorReference 0..1 Reference(ehealth-practitioner | ehealth-patient | ehealth-relatedperson) Individual responsible for the annotation
..... author[x]:authorString 0..1 string Individual responsible for the annotation
... relevantHistory 0..* Reference(ehealth-provenance) {r} Key events in history of the Task
... restriction
.... recipient 0..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | Group | ehealth-organization) {r} For whom is fulfillment sought?

doco Documentation for this format

Key Elements View

NameFlagsCard.TypeDescription & Constraintsdoco
.. Task C 0..* Task A task to be performed
inv-1: Last modified date must be greater than or equal to authored-on date.
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... Slices for extension 4..* Extension Extension
Slice: Unordered, Open by value:url
.... episodeOfCare 1..1 Reference(ehealth-episodeofcare) {r} EpisodeOfCare
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-episodeOfCare
.... taskCategory 1..1 CodeableConcept Category of task.
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-category
Binding: Task Category (required)
.... taskResponsible 1..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | ehealth-careteam) Responsible entity
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-responsible
.... restrictionCategory 1..* CodeableConcept Restriction category
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-restriction-category
Binding: Restriction Category (required)
.... resolvedTiming 0..1 (Complex) Resolved Timing
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... status ?!Σ 1..1 code draft | requested | received | accepted | +
Binding: TaskStatus (required): The current status of the task.

... intent SΣ 1..1 code unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order.

... priority S 1..1 code routine | urgent | asap | stat
Binding: RequestPriority (required): The task's priority.

... requester Σ 0..1 Reference(ehealth-device | ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Who is asking for task to be done
... owner Σ 0..1 Reference(ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Responsible individual
... relevantHistory 0..* Reference(ehealth-provenance) {r} Key events in history of the Task

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Task.statusrequiredTaskStatus
http://hl7.org/fhir/ValueSet/task-status|4.0.1
from the FHIR Standard
Task.intentrequiredTaskIntent
http://hl7.org/fhir/ValueSet/task-intent|4.0.1
from the FHIR Standard
Task.priorityrequiredRequestPriority
http://hl7.org/fhir/ValueSet/request-priority|4.0.1
from the FHIR Standard

Snapshot View

NameFlagsCard.TypeDescription & Constraintsdoco
.. Task C 0..* Task A task to be performed
inv-1: Last modified date must be greater than or equal to authored-on date.
... id Σ 0..1 id Logical id of this artifact
... meta Σ 0..1 Meta Metadata about the resource
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
... contained 0..* Resource Contained, inline Resources
... Slices for extension 4..* Extension Extension
Slice: Unordered, Open by value:url
.... episodeOfCare 1..1 Reference(ehealth-episodeofcare) {r} EpisodeOfCare
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-episodeOfCare
.... taskCategory 1..1 CodeableConcept Category of task.
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-category
Binding: Task Category (required)
.... taskResponsible 1..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | ehealth-careteam) Responsible entity
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-task-responsible
.... restrictionCategory 1..* CodeableConcept Restriction category
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-restriction-category
Binding: Restriction Category (required)
.... resolvedTiming 0..1 (Complex) Resolved Timing
URL: http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-resolved-timing
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier 0..* Identifier Task Instance Identifier
... instantiatesCanonical Σ 0..1 canonical(ActivityDefinition) Formal definition of task
... instantiatesUri Σ 0..1 uri Formal definition of task
... basedOn Σ 0..* Reference(Resource) Request fulfilled by this task
... groupIdentifier Σ 0..1 Identifier Requisition or grouper id
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... use ?!Σ 0..1 code usual | official | temp | secondary | old (If known)
Binding: IdentifierUse (required): Identifies the purpose for this identifier, if known .

.... type Σ 0..1 CodeableConcept Description of identifier
Binding: Identifier Type Codes (extensible): A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

.... system Σ 0..1 uri The namespace for the identifier value
Example General: http://www.acme.com/identifiers/patient
.... value Σ 0..1 string The value that is unique
Example General: 123456
.... period Σ 0..1 Period Time period when id is/was valid for use
.... assigner Σ 0..1 Reference(ehealth-organization) {r} Organization that issued id (may be just text)
... partOf Σ 0..* Reference(ehealth-task) {r} Composite task
... status ?!Σ 1..1 code draft | requested | received | accepted | +
Binding: TaskStatus (required): The current status of the task.

... statusReason Σ 0..1 CodeableConcept Reason for current status
Binding Description (No ValueSet): (example): Codes to identify the reason for current status. These will typically be specific to a particular workflow.

... businessStatus Σ 0..1 CodeableConcept E.g. "Specimen collected", "IV prepped"
Binding Description (No ValueSet): (example): The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.

... intent SΣ 1..1 code unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order.

... priority S 1..1 code routine | urgent | asap | stat
Binding: RequestPriority (required): The task's priority.

... code Σ 0..1 CodeableConcept Task Type
Binding: TaskCode (example): Codes to identify what the task involves. These will typically be specific to a particular workflow.

... description Σ 0..1 string Human-readable explanation of task
... focus Σ 0..1 Reference(Resource) What task is acting on
... for Σ 0..1 Reference(Resource) Beneficiary of the Task
... encounter Σ 0..1 Reference(Encounter) Healthcare event during which this task originated
... executionPeriod Σ 0..1 Period Start and end time of execution
... authoredOn C 0..1 dateTime Task Creation Date
... lastModified ΣC 0..1 dateTime Task Last Modified Date
... requester Σ 0..1 Reference(ehealth-device | ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Who is asking for task to be done
... performerType 0..* CodeableConcept Requested performer
Binding: ProcedurePerformerRoleCodes (preferred): The type(s) of task performers allowed.


... owner Σ 0..1 Reference(ehealth-organization | ehealth-patient | ehealth-practitioner | ehealth-relatedperson) {r} Responsible individual
... location Σ 0..1 Reference(Location) Where task occurs
... reasonCode 0..1 CodeableConcept Why task is needed
Binding Description (No ValueSet): (example): Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.

... reasonReference 0..1 Reference(Resource) Why task is needed
... insurance 0..* Reference(Coverage | ClaimResponse) Associated insurance coverage
... note 0..* Annotation Comments made about the task
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
.... Slices for author[x] Σ 0..1 Individual responsible for the annotation
Slice: Unordered, Closed by type:$this
..... authorReference Reference(Practitioner | Patient | RelatedPerson | Organization)
..... authorString string
..... author[x]:authorReference Σ 0..1 Reference(ehealth-practitioner | ehealth-patient | ehealth-relatedperson) Individual responsible for the annotation
..... author[x]:authorString Σ 0..1 string Individual responsible for the annotation
.... time Σ 0..1 dateTime When the annotation was made
.... text Σ 1..1 markdown The annotation - text content (as markdown)
... relevantHistory 0..* Reference(ehealth-provenance) {r} Key events in history of the Task
... restriction 0..1 BackboneElement Constraints on fulfillment tasks
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... repetitions 0..1 positiveInt How many times to repeat
.... period 0..1 Period When fulfillment sought
.... recipient 0..* Reference(ehealth-patient | ehealth-practitioner | ehealth-relatedperson | Group | ehealth-organization) {r} For whom is fulfillment sought?
... input 0..* BackboneElement Information used to perform task
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... type 1..1 CodeableConcept Label for the input
Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

.... value[x] 1..1 Content to use in performing the task
..... valueBase64Binary base64Binary
..... valueBoolean boolean
..... valueCanonical canonical(Any)
..... valueCode code
..... valueDate date
..... valueDateTime dateTime
..... valueDecimal decimal
..... valueId id
..... valueInstant instant
..... valueInteger integer
..... valueMarkdown markdown
..... valueOid oid
..... valuePositiveInt positiveInt
..... valueString string
..... valueTime time
..... valueUnsignedInt unsignedInt
..... valueUri uri
..... valueUrl url
..... valueUuid uuid
..... valueAddress Address
..... valueAge Age
..... valueAnnotation Annotation
..... valueAttachment Attachment
..... valueCodeableConcept CodeableConcept
..... valueCoding Coding
..... valueContactPoint ContactPoint
..... valueCount Count
..... valueDistance Distance
..... valueDuration Duration
..... valueHumanName HumanName
..... valueIdentifier Identifier
..... valueMoney Money
..... valuePeriod Period
..... valueQuantity Quantity
..... valueRange Range
..... valueRatio Ratio
..... valueReference Reference(Any)
..... valueSampledData SampledData
..... valueSignature Signature
..... valueTiming Timing
..... valueContactDetail ContactDetail
..... valueContributor Contributor
..... valueDataRequirement DataRequirement
..... valueExpression Expression
..... valueParameterDefinition ParameterDefinition
..... valueRelatedArtifact RelatedArtifact
..... valueTriggerDefinition TriggerDefinition
..... valueUsageContext UsageContext
..... valueDosage Dosage
..... valueMeta Meta
... output 0..* BackboneElement Information produced as part of task
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... type 1..1 CodeableConcept Label for output
Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

.... value[x] 1..1 Result of output
..... valueBase64Binary base64Binary
..... valueBoolean boolean
..... valueCanonical canonical(Any)
..... valueCode code
..... valueDate date
..... valueDateTime dateTime
..... valueDecimal decimal
..... valueId id
..... valueInstant instant
..... valueInteger integer
..... valueMarkdown markdown
..... valueOid oid
..... valuePositiveInt positiveInt
..... valueString string
..... valueTime time
..... valueUnsignedInt unsignedInt
..... valueUri uri
..... valueUrl url
..... valueUuid uuid
..... valueAddress Address
..... valueAge Age
..... valueAnnotation Annotation
..... valueAttachment Attachment
..... valueCodeableConcept CodeableConcept
..... valueCoding Coding
..... valueContactPoint ContactPoint
..... valueCount Count
..... valueDistance Distance
..... valueDuration Duration
..... valueHumanName HumanName
..... valueIdentifier Identifier
..... valueMoney Money
..... valuePeriod Period
..... valueQuantity Quantity
..... valueRange Range
..... valueRatio Ratio
..... valueReference Reference(Any)
..... valueSampledData SampledData
..... valueSignature Signature
..... valueTiming Timing
..... valueContactDetail ContactDetail
..... valueContributor Contributor
..... valueDataRequirement DataRequirement
..... valueExpression Expression
..... valueParameterDefinition ParameterDefinition
..... valueRelatedArtifact RelatedArtifact
..... valueTriggerDefinition TriggerDefinition
..... valueUsageContext UsageContext
..... valueDosage Dosage
..... valueMeta Meta

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Task.languagepreferredCommonLanguages
Additional Bindings Purpose
AllLanguages Max Binding
http://hl7.org/fhir/ValueSet/languages
from the FHIR Standard
Task.groupIdentifier.userequiredIdentifierUse
http://hl7.org/fhir/ValueSet/identifier-use|4.0.1
from the FHIR Standard
Task.groupIdentifier.typeextensibleIdentifier Type Codes
http://hl7.org/fhir/ValueSet/identifier-type
from the FHIR Standard
Task.statusrequiredTaskStatus
http://hl7.org/fhir/ValueSet/task-status|4.0.1
from the FHIR Standard
Task.statusReasonexample
Task.businessStatusexample
Task.intentrequiredTaskIntent
http://hl7.org/fhir/ValueSet/task-intent|4.0.1
from the FHIR Standard
Task.priorityrequiredRequestPriority
http://hl7.org/fhir/ValueSet/request-priority|4.0.1
from the FHIR Standard
Task.codeexampleTaskCode
http://hl7.org/fhir/ValueSet/task-code
from the FHIR Standard
Task.performerTypepreferredProcedurePerformerRoleCodes
http://hl7.org/fhir/ValueSet/performer-role
from the FHIR Standard
Task.reasonCodeexample
Task.input.typeexample
Task.output.typeexample

 

Other representations of profile: CSV, Excel, Schematron